Linksys SPA2102-AU Provisioning Manual page 46

Data Types
•
Uns<n>—Unsigned n-bit value, where n = 8, 16, or 32. It can be specified in decimal or hex format
such as 12 or 0x18 as long as the value can fit into n bits.
•
Sig<n>—Signed n-bit value. It can be specified in decimal or hex format. Negative values must be
preceded by a "-" sign. A + sign before positive value is optional.
•
Str<n>—A generic string with up to n non-reserved characters.
•
Float<n>—A floating point value with up to n decimal places.
•
Time<n>—Time duration in seconds, with up to n decimal places. Extra decimal places specified
are ignored.
•
PwrLevel—Power level expressed in dBm with 1 decimal place, such as –13.5 or 1.5 (dBm).
•
Bool—Boolean value of either "yes" or "no."
•
{a,b,c,...}—A choice among a, b, c, ...
•
IP—IP Address in the form of x.x.x.x, where x between 0 and 255. For example 10.1.2.100.
•
Port—TCP/UDP Port number (0-65535). It can be specified in decimal of hex format.
•
UserID—User ID as appeared in a URL; up to 63 characters.
•
FQDN—Fully Qualified Domain Name, such as "sip.Linksys.com:5060", or "109.12.14.12:12345".
It can contain up to 63 characters.
•
Phone—A phone number string, such as 14081234567, *69, *72, 345678, or a generic URL such as
1234@10.10.10.100:5068, or jsmith@Linksys.com. It can contain up to 39 characters.
•
ActCode—Activation code for a supplementary service, such as *69. It can contain up to 7
characters.
•
PhTmplt—A phone number template. Each template may contain one or more patterns separated by
a ",". White space at the beginning of each pattern is ignored. "?" and "*" represent wildcard
characters. To represent literally use %xx. For example, %2a represents *. It can contain up to 39
characters. Examples: "1408*, 1510*", "1408123????, 555?1.".
•
RscTmplt—A template of SIP Response Status Code, such as "404, 5*", "61?", "407, 408, 487,
481". It can contain up to 39 characters.
•
CadScript—A mini-script that specifies the cadence parameters of a signal. Up to 127 characters.
Syntax: S
S
i
section, on
D
to provide 1 ms resolution. The wildcard character "*" stands for infinite duration. The segments
within a section are played in order and repeated until the total duration is played.
Example 1:
Example 2—Distinctive ring (short,short,short,long):
Linksys SPA Provisioning Guide
2-20
[;S ], where:
1 2
=D (on /off [,on /off [,on
i i,1 i,1 i,2 i,2
and off are the on/off duration in seconds of a segment and i = 1 or 2, and j = 1 to 6.
i,j i,j
is the total duration of the section in seconds. All durations can have up to three decimal places
i
60(2/4)
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 60 s
Number of Segments = 1
Segment 1: On=2s, Off=4s
Total Ring Length = 60s
60(.2/.2,.2/.2,.2/.2,1/4)
/off [,on /off [,on /off
i,3 i,3 i,4 i,4 i,5
Chapter 2 Creating Provisioning Scripts
[,on /off ]]]]]) and is known as a
i,5 i,6 i,6
Version 3.0