Configuration Profile Parameters - Linksys SPA2102-AU Provisioning Manual

Provisioning Field Reference
This chapter provides a listing of the parameters provided on the administration web server Provisioning
tab, which can be used in configuration profile scripts. It includes the following sections:
•
•
•
•
•
The Provisioning parameters described in this chapter are recognized by the SPA beginning with
firmware release 2.0.6.
For a complete list of all the parameters available through the administration web server, and which can
be used in configuration profiles, refer to the administration guide for each product.

Configuration Profile Parameters

The following table defines the function and usage of each parameter in the Configuration Profile
Parameters section under the Provisioning tab.
Table 4-1
Parameter Name
Provision_Enable
Resync_On_Reset
Version 3.0
Configuration Profile Parameters, page 4-1
Firmware Upgrade Parameters, page 4-5
General Purpose Parameters, page 4-6
Macro Expansion Variables, page 4-7
Internal Error Codes, page 4-9
Configuration Profile Parameters
C H A P T E R
Description and Default Value
Controls all resync actions independently of
firmware upgrade actions. Set to yes to enable
remote provisioning.
The default is Yes.
Triggers a resync after every reboot except for
reboots caused by parameter updates and
firmware upgrades.
The default is Yes.
Linksys SPA Provisioning Guide
4
4-1