Linksys SPA2102-AU Provisioning Manual page 47

Chapter 2 Creating Provisioning Scripts
•
FreqScript—A mini-script that specifics the frequency and level parameters of a tone. Up to 127
characters. Syntax: F
frequency in Hz (unsigned integers only) and L
decimal places). White spaces before and after the comma are allowed (but not recommended).
Example 1—Call Waiting Tone:
Example 2—Dial Tone:
•
ToneScript—A mini-script that specifies the frequency, level and cadence parameters of a call
progress tone. May contain up to 127 characters. Syntax: FreqScript;Z
similar to the S
components parameter: Z
[,on
indicates which of the frequency components given in the FreqScript are used in that segment; if
more than one frequency component is used in a segment, the components are summed together.
Example 1—Dial tone:
Example 2—Stutter tone:
Version 3.0
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 60s
Number of Segments = 4
Segment 1: On=0.2s, Off=0.2s
Segment 2: On=0.2s, Off=0.2s
Segment 3: On=0.2s, Off=0.2s
Segment 4: On=1.0s, Off=4.0s
Total Ring Length = 60s
@L [,F
1 1 2
440@-10
Number of Frequencies = 1
Frequency 2 = 440 Hz at –10 dBm
350@-19,440@-19
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
section in a CadScript except that each on/off segment is followed by a frequency
1
= D
1
/off /f [,on /off /f ]]]]]), where fi,j = n
i,5 i,5 i,5 i,6 i,6 i,6
350@-19,440@-19;10(*/0/1+2)
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 10 s
Number of Segments = 1
Segment 1: On=forever, with Frequencies 1 and 2
Total Tone Length = 10s
350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
Number of Cadence Sections = 2
Cadence Section 1: Section Length = 2s
Number of Segments = 1
Segment 1: On=0.1s, Off=0.1s with Frequencies 1 and 2
@ [,F @L [,F @L [,F @L
L2 3 3 4 4 5
–L are corresponding levels in dBm (with up to 1
1 6
(on /off /f [,on /off
1 i,1 i,1 i,1 i,2 i,2
[+n ]+n
1 2
[,F @L ]]]]], where F –F
5 6 6 1
[;Z ]. The section Z
1 2
/f [,on /off /f [,on /off
i,2 i,3 i,3 i,3 i,4
[+n [+n [+n ]]]]] and 1 < n
3 4 5 6
Linksys SPA Provisioning Guide
Data Types
are
6
is
1
/f
i,4 i,4
< 6
k
2-21