Figure 3-22. Opening and Closing the System
1
traction pad
3
cover release latch lock
Closing the System
1
Place the cover on the chassis and slide it to the front of the chassis
until it snaps into place. See Figure 3-22.
2
Secure the cover with the securing screw. See Figure 3-22.
Cooling Fans
Removing a Cooling Fan
WARNING: Do not attempt to operate the system without the cooling fans.
WARNING: The cooling fan can continue to spin for some time after the system
has been powered down. Allow time for the fan to stop spinning before removing
it from the system.
118
|
Installing System Components
2
system cover
4
securing screw