Installing The Sas Mezzanine Card - Dell PowerEdge C6145 Hardware Owner's Manual

6 Remove the three screws that secure the SAS mezzanine card to the
bracket. See Figure 3-14.
7 Remove SAS mezzanine card away from the bracket. See Figure 3-14.
Figure 3-14. Removing and Installing the SAS Mezzanine Card
1 screw (3)
3 SAS mezzanine-card bracket

Installing the SAS Mezzanine Card

CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Align the SAS mezzanine card to the bracket by the three screw holes.
See Figure 3-14.
2 Replace the three screws to that secure the SAS mezzanine card to the
bracket. See Figure 3-14.
3 Install the SAS mezzanine-card assembly to the mezzanine-card bridge
board on the system-board assembly. See Figure 3-13.
102 | Installing System Components
2 SAS mezzanine card