Email Alert Destination - Dell PowerEdge C1100 Use Instructions

View the following information provided on the Console Redirection page to ensure that a console
redirection session is available.
Table 1-15. Console Redirection Configuration
Item
Enabled
Max Sessions
Active Sessions
Video Encryption Enabled

Email Alert Destination

When the Dell Remote Management Controller senses a platform event, such as an environmental
warning or a component failure, an alert message can be sent to one or more email addresses. The
Email Alert Destination window enables you to enter email addresses, IP addresses, and to activate
the alerts for each address.
Table 1-16. Destination Email Address
Item
Email Alert Number
State
Destination Email Address
To set up a destination to receive alerts, perform the following steps:
1 Click an Email Alert Number.
The Set Email Alert window displays.
2 Enable/Disable the alert email address, enter the destination email address, and enter a brief
description for the Subject of the email.
3 Click Apply Changes.
4 Click Go Back To the Email Alert Destination Page.
5 Enter the SMTP (e-mail) Server IP Address settings.
6 Click Apply Changes.
Description
Checked indicates enabled; unchecked indicates disabled.
View the maximum number of console redirection sessions that are
possible.
View the number of active console sessions.
Checked indicates enabled; unchecked indicates disabled.
Description
You can set up to four email destinations to receive alerts.
Enabled indicates that the email address settings are active.
Disabled indicates that the email address settings are not active.
The email address that receives the alert messages.
Using the Baseboard Management Controller
17