Console; Console Redirection And Virtual Media - Dell PowerEdge C1100 Use Instructions
Using the baseboard management controller
Hide thumbs
Also See for PowerEdge C1100:
- Getting started (145 pages) ,
- Hardware owner's manual (136 pages) ,
- Getting started with (80 pages)
Table of Contents
Advertisement
•
System Board 1.5V ESB2 PG
•
System Board 1.5V PG
•
System Board 1.8V PG
•
System Board 3.3V PG
•
System Board 5V PG
•
System Board Backplane PG
•
System Board CPU VTT
•
System Board Linear PG
Table 1-12. Voltage Probe List
Item
Status
Probe Name
Reading
Console
Console Redirection and Virtual Media
The Console Redirection page enables you to use the display, mouse, and keyboard on the local
management station to control the corresponding devices on a remote managed system. You can
run a maximum of four simultaneous console redirection sessions.
NOTE:
Before you can use the console redirection feature, your browser must have the Java Video
Viewer installed. This feature needs Java 1.5.15 or later installed on the host system. If the iBMC detects
that the Java Video Viewer is not installed, you are prompted to install it.
NOTE:
Sometimes the Console is referred to as the Session Viewer.
NOTE:
The recommended display resolution on the management station (or client) is at least 1280 x 1024
pixels at 60 Hz with 32 bit color. You cannot view the console in full screen mode if your monitor resolution
is less than this minimum.
Table 1-13. Console Redirection Descriptions
Item
Console Redirection Enabled
Video Encryption Enabled
Max Sessions
12
Using the Baseboard Management Controller
Description
See Table 1-11.
Name of the sensor.
Good indicates that the current voltage is between the minimum and
maximum warning thresholds.
Description
Yes indicates that Console Redirection is enabled.
Yes indicates that Video Encryption is enabled.
Displays the maximum number of console redirection sessions that
are possible.
Advertisement
Table of Contents
