Temporary Tone Dialing; Hold; Equalizer - AT&T TL92270 User Manual

Telephone operation
Options while on calls

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to touch-
tone dialing temporarily during a call. This is useful if you need to send
touch-tone signals to access your telephone banking or long distance
services.
During a call:
1. Press TONE .
2. Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing mode after you end
the call.

Hold

You can place a home or cell call on hold. You hear an alert tone if you
have not taken the call off of hold after 14 minutes. You hear another alert
tone 30 seconds later. At 15 minutes on hold, the call on hold automatically
disconnects.
To place a home call on hold:
Press HOLD. Home call on hold appears and
•
HOME/
FLASH
To resume a home call on hold:
• Press HOME/
To place a cell call on hold:
• Press HOLD. Cell call on hold appears and
CELLULAR flashes.
To resume a cell call on hold:
CELLULAR.
• Press

Equalizer

The equalizer feature on the handset enables you to change
the quality of the handset audio to best suit your hearing.
While on a call, or listening to a message or announcement,
press EQ to select the equalizer setting Treble 1, Treble 2,
Bass or Natural (the default setting) for the handset. The
current setting is shown on the handset for two seconds.
NOTES:
1. The equalizer feature does not apply to the speakerphone on the
telephone base or the connected Bluetooth headset.
2. If you switch the call between the handset and speakerphone by pressing
the audio setting remains unchanged.
3. The current equalizer setting remains unchanged until a new setting is selected.
flashes.
.
FLASH
45
/SPEAKER,