Pair A Headset - AT&T TL92270 User Manual

Bluetooth
Bluetooth setup

Pair a headset

Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your headset user's
manual to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
1. Press MENU/
the main menu.
2. Press CID or
/SELECT
MENU
CID
3. Press or
press /SELECT. The screen displays ADD HEADSET
MENU
Place Bluetooth headset next to base. Press SELECT.
• If there are already four devices on the paired devices
list, the screen displays Maximum of 4 devices can be
paired and prompts you to replace an existing paired
device (page 21).
4. Press /SELECT. The screen displays Please set
MENU
your headset to discoverable mode, then
press SELECT.
• If a device is already connected to the telephone
base, the screen displays Connected device will
be temporarily disconnected. Press SELECT. Press
/SELECT to temporarily disconnect the device
MENU
and continue the pairing process.
5. Set your headset to discoverable mode.
6. Press /SELECT to set your telephone base to
MENU
discoverable mode and search for your headset.
7. Once the telephone base finds your headset, press
/SELECT
MENU
8. Enter the PIN of your headset (the PIN for most
Bluetooth devices is 0000), then press
on the handset in idle mode to enter
SELECT
DIR to highlight Bluetooth, then press
.
DIR to highlight Add headset, then
.
/SELECT
MENU
16
Answering sys
Directory
Cal l log
Intercom
Bluetooth
BLUETOOTH
Download dir
Add cel lular
Add headset
Active devices
ADD HEADSET
Place Bluetooth
headset next to
base.
Press SELECT
Please set your
headset to
discoverable
mode, then
press SELECT
Searching for
Bluetooth
headsets...
FOUND DEVICES
Headset A Heads
Headset B
.
ADD HEADSET
Enter PIN:
----