Handset settings
Telephone settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. If you subscribe to caller ID service, the day, month and time
are set automatically with each incoming call. Before using the answering
system, set the date and time as follows.
After handset registration or a power failure,
set the date and time
To set the date and time:
Press MENU/
1.
the main menu.
CID
2.
Press
/SELECT.
MENU
3.
Press
CID
press
/SELECT.
MENU
4.
Press
/SELECT to select Date & time.
MENU
5.
Press
CID
/SELECT to confirm, or enter the correct number
MENU
using the dial pad.
CID
6.
Press
/SELECT to confirm, or enter the correct number
MENU
using the dial pad.
7.
Press
CID
correct number using the dial pad then press
/SELECT.
MENU
8.
Press
CID
/SELECT to confirm, or enter the correct number
MENU
using the dial pad.
9.
Press
CID
confirm, or enter the correct number using the dial pad.
10.
Press
CID
confirm. You hear a confirmation tone.
NOTE: If the clock is not set when a message is recorded, the system announces, "Time
and day not set" before the message is played.
(see page 8).
on the handset in idle mode to enter
SELECT
or DIR to highlight Settings, then press
or DIR to highlight Set date/time, then
or DIR to select the month and then press
or DIR to select the day and then press
or DIR to select the year or enter the
or DIR to select the hour and then press
or DIR to select the minute and then press
or DIR to choose AM or PM, then press
the handset will prompt you to
30
SETTINGS
LCD language
Clr voicemail
Key tone
Set date/time
SET DATE/TIME
Date & time
CID time sync
SET DATE
01/01/09
MM/DD/YY
SET TIME
06:08 PM
/SELECT to
MENU
/SELECT to
MENU