Answering System Operation; Day & Time Announcements - AT&T E5943 User Manual

Press TIME /
1.
SET
The system will announce the
current clock setting, then
announce
"To begin setting the
clock, press TIME/SET, then press
CHANGE to change the setting or
press TIME/SET to continue."
2. Press TIME /
SET
3. Press CHANGE
until the system announces
the correct day, then press
/ SET.
TIME
4. Press CHANGE
until the system announces
the correct hour, then press
/ SET.
TIME
5. Press CHANGE
until the system announces
the correct minutes, then
press / SET.
TIME
6.
Press CHANGE
until the system announces
the correct year, then press
/ SET. The system
TIME
announces the current
clock setting.

Answering system operation

Turning the answering sys-
tem on and off
Day and time announcements
To set day & time
Before playing each message, the answering sys-
tem announces the day and time the message was
received.
Before using the answering system, you should fol-
low the steps on the left to set the day and time,
so messages are dated correctly.
The system uses voice prompts to guide you. Each
time you press
CHANGE
year advances by one. When you hear the correct
setting, press
/ SET
TIME
To check day & time
You can press
TIME /
SET
current day and time without changing it.
NOTES:
1. Press and hold to advance the minute or year by increments of
CHANGE
10 (the year can be set from 2000 to 2039).
2. Caller ID provides the time and date. Set the year so that the day of the
week can be calculated from the caller ID information. After you set the
time once, it will thereafter be set automatically with incoming caller ID
information. The time will be set automatically only if you subscribe to
caller ID service provided by your local telephone company (see page 6).
31 31
, the day, hour, minute or
to move to the next setting.
at any time to hear the