Advertisement
26
ntdp timer port-delay
Use the
ntdp timer port-delay
topology-collection request packet through its successive ports.
Use the
ntdp timer port-delay
topology-collection request packet through its successive ports. A switch forwards received topology
request packets to all its ports in turn. After forwarding a received topology-collection request packet through
one port, the switch delays for specific period before it forwards the packet through the next port.
ntp-service access
Use the
ntp-service access
ntp-service authentication enable
Use the
ntp-service authentication enable
function.
ntp-service authentication-keyid
Use the
ntp-service authentication-keyid
ntp-service broadcast-client
Use the
ntp-service broadcast-client
broadcast client mode.
ntp-service broadcast-server
Use the
ntp-service broadcast-server
ntp-service in-interface disable
Use the
ntp-service in-interface disable
ntp-service max-dynamic sessions
Use the
ntp-service max-dynamic-sessions
ntp-service multicast-client
Use the
ntp-service multicast-client
multicast client mode.
ntp-service multicast-server
Use the
ntp-service multicast-server
multicast server mode.
ntp-service reliable authentication-keyid
Use the
ntp-service reliable authentication-keyid
a trusted key.
ntp-service source-interface
Use the
ntp-service source-interface
ntp-service unicast-peer
Use the
ntp-service unicast-peer
ntp-service unicast-server
Use the
ntp-service unicast-server
mode.
open
Use the
open
packet-filter
Use the
packet-filter
command to set the delay time for a switch to forward a received
command to set the delay time for a switch to forward a received
command to set the authority to access the local equipment.
command to configure an Ethernet switch to operate in NTP
command to configure NTP broadcast server mode.
command to configure an Ethernet switch to operate in NTP
command to configure an Ethernet switch to operate in NTP
command to designate an interface to transmit NTP message.
command to be an active NTP peer.
command to configure an Ethernet switch to operate in NTP server
command to establish a control connection with an FTP server.
command to define the packet filter function in the QoS profile.
command to enable the NTP-service authentication
command to configure an NTP authentication key.
command to disable an interface to receive NTP message.
command to set how many sessions can be created locally.
command to specify an authentication key to be
3Com Switch 4200G Family
Command Reference
System view
System view
System view
System view
VLAN Interface view
VLAN Interface view
VLAN Interface view
System view
VLAN Interface view
VLAN Interface view
System view
System view
System view
System view
FTP Client view
QoS Profile view
Advertisement
