Table of Contents
Advertisement
Preface: About This Document
This document describes how to install, configure, and troubleshoot HP internal Serial-Attached
SCSI (SAS) controllers on HP-UX 11i v2 and 11i v3 platforms. The latest version of this document
is available online at:
http://docs.hp.com/en/netcom.html
Intended Audience
This document is for system and network administrators responsible for installing, configuring,
and managing fault tolerant data storage. Administrators must know HP-UX operating system
concepts, commands, and configuration.
This document is not a tutorial.
New and Changed Documentation in This Edition
This Support Guide was published in conjunction with the September 2009 (AR0909) release of
HP-UX 11i v3. This is the sixth edition of this document.
Publishing History
Table 1 Publishing History Details
Document Manufacturing Part
Number
5991-5495
J6369-90041
J6369-90045
J6369-90070
J6369-90071
5900-0112
What's in This Document
This Support Guide is divided into several chapters containing physical descriptions, installation,
configuration, and troubleshooting information.
Chapter 1 "Controller Overview"
functionality.
Chapter 2 "Replacing a Controller"
Controller.
Chapter 3 "Configuring the Controller Offline"
SAS controllers offline using the drvcfg and cfggen commands.
Operating Systems
Supported
HP-UX 11i v2
HP-UX 11i v2
HP-UX 11i v3
HP-UX 11i v2
HP-UX 11i v3
HP-UX 11i v2
HP-UX 11i v3
HP-UX 11i v2
HP-UX 11i v3
HP-UX 11i v2
HP-UX 11i v3
provides a general overview of controller features and
lists the steps to replace an HP 8 Internal Port PCI-X SAS
Supported Product
Versions
B.11.23.0606
B.11.23.0612
B.11.31
B.11.23.0706
B.11.31.0706
B.11.23.0712
B.11.31.0712
B.11.23.0803
B.11.31.0803
B.11.23.0909
B.11.31.0909
provides information on configuring HP internal
Publication Date
September 2006
February 2007
June 2007
December 2007
March 2008
September 2009
Intended Audience
7
Advertisement
Table of Contents
