Table of Contents
Advertisement
8.
Press D to overwrite (erase) all of the data on the disks and create a new, empty logical
volume with RAID 1 mirroring.
WARNING!
This function has been disabled in later versions of drvcfg.
WARNING!
data on the disks will be permanently lost. If you are not certain that the disks are empty or
that their contents have been backed up, press Esc to cancel the Create New Array process.
Repeat the process when the disk contents have been verified.
When you have chosen an option, the following screen appears:
9.
Select Save changes then exit this menu and press Enter. The array is created.
36
Configuring the Controller Offline
Option M, "Keep existing data and migrate to an IM array," is not supported.
If you overwrite the disks with option D and create a new array, all of the
Advertisement
Table of Contents
