Lubrication - Brother BAS-364E Instruction Manual

11. Lubrication

Turn off the power switch before starting any cleaning work, otherwise the machine may operated if the foot
switch is depressed by mistake, which could result in injury.
Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do
not get into your eyes or onto your skin, otherwise inflammation can result.
Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting
and diarrhoea.
Keep the oil out of the reach of children.
Note
Fill the machine with oil when the oil level is down to about one-third full in the oil sight glass. If oil is not added
G
and the oil drops below this level, there is the danger that the machine may seize during operation.
Be sure to let the machine operate for a while after adding the oil.
G
Be sure to use Brother-specified machine oil (Nisseki Sewing Lub. 10).
G
1. Fill the oil tank with sewing machine oil.
3. Once or twice a week, fill the rotary hook lubrication tank B with machine oil from lubrication oil hole A until the tank
is approximately two-thirds full. If more oil than this is added, oil may leak from the rotary hook.
A
BAS-364E, 366E, 370E, 375E
CAUTION
2. Fill the cooling tank q with silicon oil.
B
Chapter 3 INSTALLATION
q
8