Lubrication Method - Brother S-6280A Instruction Manual

2-3. Lubrication method

Do not connect the power plug until lubrication is complete.
If, the treadle is depressed by mistake. the sewing machine may operate and cause injury.
When handling the lubricant, use protective goggles or gloves to avoid contact with your eyes or
skin.
Doing so may cause irritation.
Do not drink lubricating oil. Diarrhea and vomiting may occur.
Keep it out of the reach of children.
Hold the base of the nozzle firmly when cutting the nozzle of the oil tank.
Holding the nozzle by its tip may cause injury by scissors.
Note
Wipe off any dirt from the oil reservoir with a cloth.
1. Supply lubricant if the oil level is below the <LOW> mark.
For the lubricating oil, use Brother specified oil <JX
・
Nippon Oil & Energy Corporation made by Sawing
Glub 10N; VG10>.
*If it is difficult to obtain, use <Exxon Mobil Exotex SM10; VG10> as
the recommended oil.
・ When the lubricating oil gets dirty, remove the oil
cover screw and replace the lubricating oil.
・ Wipe off any dirt from the dust magnet and oil pan.
Treat waste oil properly in accordance with laws and
regulations.
S-6280A
2. How to install
6