Common Efi Shell Commands; Efi Shell Commands And Descriptions - HP Integrity rx7620 Installation Manual

Common EFI Shell Commands

The following table lists common EFI commands.
Table B-1 EFI Shell Commands and Descriptions
Command
Boot Commands
autoboot
bcfg
boottest
dbprofile
lanboot
reconfigreset
reset
search
Configuration Commands
Commands for changing and retrieving system (nPartition) information.
acpiconfig
cellconfig
cpuconfig
date
dimmconfig
err
errdump
fru
info
monarch
palproc
romdrivers
rootcell
salproc
tftp
time
variable
ver
Device, Driver, and Handle Commands
Commands for managing devices, drivers, and handles.
baud
80 EFI Utilities
Description
Set and view the autoboot timeout variable.
Display and modify the driver and boot configuration.
Set and view BootTest bits.
Display and modify direct boot profiles for use by lanboot.
Boot over the LAN.
Reset the system (nPartition) for reconfiguration. The nPartition remains
inactive, in the shutdown for reconfig state.
Reset the system (nPartition).
Connect drivers for bootable devices.
Set and view ACPI configuration mode.
Deconfigure and reconfigure cells. (Set cell use-on-next-boot values.)
Deconfigure and reconfigure CPUs.
Display the current date or set the date of the system (nPartition).
Deconfigure and reconfigure memory (DIMMs).
Display and change the error level.
View and clear logs.
View FRU data.
Display hardware information.
Set and view a monarch processor.
Make a PAL call.
Enable and disable PCI expansion ROM drivers.
Set/view preferred root cells. (Set nPartition core cell choices.)
Make a SAL call.
Perform TFTP operation to a bootp/DHCP enabled UNIX boot server.
Display the current time or set the time of the system (nPartition). EFI
time is set and presented in Greenwich Mean Time (GMT).
Save and restore specific EFI variables.
Display version information.
View serial port com settings.