Set Up An Integrated Remote Console (Rx2660, Rx3600, Rx6600, Bl860C, Bl870C, Rx7640, Rx8640, And Superdome/Sx2000 Servers Only) - HP Integrity rx7620 Installation Manual

8. The set up is complete. Proceed to the GUI Console installation process:
Console" (page
To install the HP Graphics and USB Combo Card using the Enhanced interface (gray background),
complete the following steps:
1. Install the HP Graphics and USB Combo Card in an open PCI slot of the server.
2. Connect a VGA monitor, USB HP keyboard, and USB mouse to the relevant ports.
3. Boot the server to EFI.
4. From the EFI Boot Manager, select Boot Configuration.
5. Select Console Configuration.
6. Select Select Output Console.
7. Select the graphics card PCI device and press Enter. The video display is now directed to
the GUI console.
8. The set up is complete. Proceed to the GUI Console installation process:
Console" (page
Set up an Integrated Remote Console (rx2660, rx3600, rx6600, BL860c, BL870c,
rx7640, rx8640, and Superdome/sx2000 Servers Only)
The Integrated Remote Console (IRC) lets you use Windows clients running Internet Explorer
to remotely view and manage HP Integrity servers featuring the iLO 2 management processor.
This functionality is supported on rx2660, rx3600, rx6600, BL860c, and BL870c servers only. It is
also supported on rx7640, rx8640, and Superdome/sx2000 servers when the HP Lights Out
Advanced KVM card is installed (part number: AD307A).
The IRC combines keyboard, video, and mouse into a remote, virtual interface. Use it to view
the server display and interact with it. When you use IRC in combination with Virtual Media
(See "Set up a Virtual Media (vMedia) Drive" (page
of server operating systems and software. You can also use the IRC to perform server maintenance
tasks and run applications remotely that require keyboard and mouse input.
NOTE:
You can use the IRC in place of the GUI Console method of installation anywhere the
GUI method is described in this document.
The IRC and vMedia features are enabled only after you obtain and install an iLO 2 MP Advanced
Pack license (part number AB500A). If you are not licensed and try to use these features, the
message: iLO 2 feature not licensed appears. Free limited-term trial licenses are available.
For more information about the iLO 2 MP Advanced Pack licensing or to obtain a free limited-term
license, go to:
http://h71028.www7.hp.com/enterprise/cache/279991-0-0-0-121.html.
For more information about iLO 2 functionality on HP rx7640, rx8640, and Superdome/sx2000
servers using the HP Lights Out Advanced KVM card, go to:
http://www.hp.com/products1/serverconnectivity/misc/
iLOADVKVMCard.html?jumpid=reg_R1002_USEN
Follow the factory installation or manual installation instructions located on the Integrated
Lights-Out Advanced Pack for HP Integrity Servers; Certificate of License to Use; License Installation
Card to activate your license.
This document does not provide a complete description of IRC or vMedia. For more information
about these powerful features, see the HP Integrity iLO 2 MP Operations Guide:
http://docs.hp.com/en/5991-6005/5991-6005.pdf
To set up an IRC (on rx2660, rx3600, rx6600, BL860c, BL870c, rx7640, rx8640, and
Superdome/sx2000 servers only), complete the following steps:
1. Using a secure web browser, enter the name or IP address of the server MP.
37).
37).
22)), you can perform remote GUI installations
Task 6: Set up an Installation Method
"Install from a GUI
"Install from a GUI
21