Network; Storage; Operating System - HP Integrity rx7620 Installation Manual

Network

The NIC Management Agents display logical HP NICs that are configured on the system you
are viewing. This can be a virtual NIC, single NIC, or teams of NICs. The information displayed
depends on the type of NIC, and can include the following:
• NIC controller information
• NIC interface information
• Ethernet statistics
• Logical adapter information

Storage

The Storage section provides an overview of the selected server's mass storage subsystem. The
mass storage controllers being used by the server are listed in the Navigation frame on the left
side of the screen. The colored ball next to each controller indicates the status of that controller.
NOTE:
EMC, EVA, VA, and XP storage systems are not supported by WebAgents.
The information displayed can include the following:
• File system space used
• SCSI disk information
• SCSI controller information
• Drive array controller information
• Fibre Channel storage information
• Fibre Channel tape controller information
• IDE controller information
• SAS host bus adapter information

Operating System

The Operating System category displays the following information:
• Logical disks
Information includes volume, free space, queue length, and disk busy time.
• Memory
Information includes available KBytes, pages/second, pages input/second, pages
output/second, pages reads/second, cache bytes, cache faults, and pool non-paged bytes.
• Network
Information includes TCP information, including active connections, established connections,
segments/second, segments retransmitted/second, and connection failures. Also includes
controller information, including total bytes/second, packets/second, output queue length,
packet errors, current bandwidth, bytes sent and received, and packets sent and received.
• Physical disks
Information includes volume name, queue length, and disk busy time.
• Processes
Information includes process name, number of active threads, private bytes, page file bytes,
working set, page faults, % CPU time, and % privileged CPU time.
• Processor
Information includes CPU name, interrupts/second, % user CPU time, % privileged CPU
time, % DPC time, % interrupt time, and % CPU time with thresholds supported.
• Server
Information includes system health (system up time, total threads, context switches/second,
processor queue length, total processes, and % registry usage), security (access permission
errors, access granted errors, server logon errors, and server sessions errored out), and server
108 SMH and Management Agents