Changing The Rhythm Volume - Yamaha DDK-7 Owner's Manual

5
NOTE
Depending on the volume
value (set by the slider), two
adjacent VOLUME lamps
may be lit at the same time,
indicating an intermediate
position.
66 DDK-7 Owner's Manual
To use the Break patterns:
As you play the DDK-7 along with the rhythm, occasionally press the [BREAK]
button.
Moreover, you can start/stop the rhythm and switch the sections by using the
Footswitch or optional footpedal. See page 201 for details.

Changing the rhythm volume

There are two ways to set the rhythm volume: using the VOLUME buttons on the
panel and using the volume slider in the display. The volume buttons let you make
coarse adjustments to the volume while the slider gives you fine control.
Using VOLUME buttons on the panel
(coarse):
Press the VOLUME buttons of the rhythm on the panel to
set the desired level. The buttons have seven volume
settings, from a minimum of 0, or no sound, to a
maximum of full volume.
Using VOLUME slider in the display (fine):
Pressing the rhythm button on the panel again (or pressing the rhythm name of the
selected rhythm in the display again) calls up the Rhythm Condition Display.
To set the volume, touch the PERCUSSION VOLUME slider in the display or use the
Data Control Dial. The control range is from 0 (no sound) to 24 (full volume).
DATA CONTROL