Yamaha DDK-7 Owner's Manual page 150

8
150 DDK-7 Owner's Manual
3
ATTACK RATE
Determines how quickly the Element will reach its maximum level after the key is
played. Higher values produce a faster attack.
Range: 0 – 127
4
RELEASE RATE
Determines how much time it takes for the level to reach 0 after the key is released.
Higher values make the time shorter.
Range: 1 – 127
5
CUTOFF FREQ.
Determines the cutoff frequency of the filter.
Range: 9600 – 24000 cent
6
RESONANCE
Determines the amount of resonance (harmonic emphasis) applied to the signal at the
cutoff frequency. Some Elements are not affected by this parameter.
Range: 16 – 140
Filter — Cutoff frequency and Resonance
Filter modifies the tone by cutting the output of a specific frequency portion of the
sound. This DDK-7 is equipped with a low pass filter, which passes only those
signals below the cutoff frequency and cuts signals above the cutoff frequency.
Level
These frequencies are passed by the filter.
Level
You can produce a relatively bright or darker sound by setting the cutoff frequency.
Resonance is a parameter that boosts the level of the signal in the area of the cutoff
frequency. By emphasizing the overtones in this area, this can produce a distinctive
"peaky" tone.
Cutoff Frequency
Resonance
Frequency
Cutoff Frequency
Frequency