Yamaha DDK-7 Owner's Manual page 204

10
204 DDK-7 Owner's Manual
Assigning functions to a Foot Pedal:
1
Press the [UTILITY] button to call up the Utility display.
Press the [F.PEDAL] button at the top right of the display to call
2
up the Foot Pedal Page.
In this display, you can assign the control function to the Foot Pedal.
Select the control function to be assigned to the Foot Pedal.
3
Select the desired function button from the left side of the display if you've
connected the Foot Pedal to the FOOT PEDAL (1 VOLUME) terminal; select
from the right side if you've connected the Foot Pedal to the FOOT PEDAL (2
SUSTAIN) terminal.
The polarity of the Foot Pedal will automatically be selected depending on the
selected function; however, you can select the polarity manually.
The effect is constantly applied as long as the Foot Pedal is
4
pressed.
Releasing the Foot Pedal turns the effect off.