Yamaha DDK-7 Owner's Manual page 57

DISTORTION+
A combination of Distortion and Delay.
Effect Type Effect Type
DIST+DELAY V_DIST H+DLY
ODRV+DELAY V_DIST S+DLY
XG DIST+DLY DIST+T DLY
XG ODRV+DLY ODRV+T DLY
CMP+DIST+DLY CMP+DST+TDLY
CMP+ODRV+DLY CMP+OD+TDLY
XG CMP+DT+DL V_DST H+TDLY
XG CMP+OD+DL V_DST S+TDLY
Parameter Value
Dist. Drive 0 - 127
Dist. Out Level 0 - 127
L DelayTime 0.1 - 1486.0 msec
R DelayTime 0.1 - 1486.0 msec
Delay -63 - +63
Feedback
Comp. -48 - -6db
Threshold
DelayTime 0.1 - 1486.0 msec
16th - 2nd
Overdrive 0 - 100%
Device Transistor, Vintage,
Dist 1, Dist 2, Fuzz
Speaker Flat, Stack, Combo,
Twin, Radio,
Megaphone
Presence 0 - 20
Dry/Wet D63>W - D<W63
Description
Determines the depth of
distortion. The higher the
value the greater the amount
of distortion.
Determines the output level
of the distorted sound.
Determines the time that
elapses between the original
sound and the delayed
repeat in the left channel.
Determines the time that
elapses between the original
sound and the delayed
repeat in the right channel.
Determines the amount of
delayed repeats in the
sound.
Determines the input level at
which compression begins to
be applied.
Determines the time that
elapses between the original
sound and the delayed
repeat. When using Tempo
Delay series such as DIST+T
DLY, this determines the
speed (in note values) to
match the tempo of the
rhythm/song.
Determines the depth of
overdrive. The higher the
value the greater the amount
of distortion.
Determines the device that
will create distortion:
Transistor, VintageTube,
Distortion, Fuzz and so on.
Determines the simulated
speaker type: Flat, Stack,
Combo, Twin, Radio,
Megaphone and so on.
Values in the higher range
can give vocals more
presence.
Determines the balance of
original sound and the effect
sound.
WAH
This uses an automatic up/down filter sweep to
change the timbre of the sound, producing a
"wahwah" sound.
Effect Type Effect Type
AUTO WAH TC WAH+ODRV
XG AUTO WAH XG TC WAH+OD
TOUCH WAH 1 CLAVI TC WAH
TOUCH WAH 2 EP TOUCH WAH
AT WAH+DIST WAH+DST+TDLY
XG AT WH+DST WAH+OD+T DLY
AT WAH+ODRV WAH+DIST+DLY
XG AT WAH+OD XG WH+DST+DL
TC WAH+DIST WAH+ODRV+DLY
XG TC WH+DST XG WH+OD+DLY
Parameter Value
LFO Freq. 0.00 - 39.7 Hz
LFO Depth 0 - 127
Cutoff 0 - 127
Resonance 1.0 - 12.0
Dist. Drive 0 - 127
Drive 0 - 127
Sensitivity 0 - 127
DelayTime 0.1 - 1486.0 msec
16th - 2nd
Delay -63 - +63
Feedback
Dist. Out Level 0 - 127
Output Level 0 - 127
Dry/Wet D63>W - D<W63
Description
Determines the speed of the
Wah effect.
Determines the depth of the
Wah effect.
Determines the central
frequency that the wah filter
acts upon.
Determines the frequency
bandwidth (around the
central frequency set in
Cutoff above) that the wah
filter affects.
Determines the depth of
distortion. The higher the
value the greater the amount
of distortion.
Determines the depth of
distortion. The higher the
value the greater the amount
of distortion.
Determines the degree to
which the wah filter is
affected by your playing
touch.
Determines the time that
elapses between the original
sound and the delayed
repeat. When using Tempo
Delay series, this determines
the time (in note values) to
match the tempo of the
rhythm/song.
Determines the amount of
delayed repeats in the
sound.
Determines the output level
of the distorted sound.
Determines the output level
of the effect-applied sound.
Determines the balance of
the original sound and the
effect sound.
DDK-7 Owner's Manual 57
4