Original Settings - Konica Minolta bizhub 361 Function Manual

Using fax/scanning functions
3
Select the desired size and orientation.
– If a button other than [Auto] was touched, select the desired paper size,
and then touch [OK].
4
Touch [OK], and then touch [OK] in the next screen that appears.
Otherwise, touch [Main Screen].

3.3.8 Original Settings

Select the binding position and orientation of the original.
Parameter
Original Direction
Binding Position
These functions can be used together.
501/421/361
Description
Select the orientation of the original. After the original is scanned,
the data is processed so that it is correctly oriented.
For details on selecting the original orientation, refer to
"Selecting the original orientation (Original Direction settings)" on
page 1-17.
Select the binding position, for example, when holes are
punched in the original or the original is stapled. In addition,
specify the binding position when a double-sided original is
loaded.
This adjusts the scan of double-sided originals so that the
binding position is not reversed.
Left: Select this setting for an original with a binding margin on
the left side.
Top: Select this setting for an original with a binding margin at the
top.
Auto: The binding margin is on the long side if the page is 11-11/
16 inch (297 mm) or less, or it is on the short side if the page is
more than 11-11/16 inch (297 mm).
3
3-26