Pausing Scanning/Printing - Konica Minolta bizhub 361 Function Manual

Using copy functions

2.12 Pausing scanning/printing

Follow the procedure described below to temporarily stop scanning the
original and stop the printing operation.
1
Press the [Stop] key while an original is being scanned or a job is being
printed.
– Scanning/printing temporarily stops.
– If an original is being scanned for a job, pressing the [Stop] key
temporarily stops scanning.
The message "Job has stopped." appears.
2
To continue all temporarily stopped jobs, press the [Start] key.
– To delete a temporarily stopped job, select the job that you wish to
delete, and then touch [Delete].
– Select only one job at a time to be deleted.
501/421/361
2
2-33