2.9.2
I/O Shield
The back panel I/O shield for the board must meet specific dimension and material
requirements. Systems based on this board need the back panel I/O shield to pass
certification testing. Table 32 lists the compatible I/O shield design drawings.
Table 32. Compatible I/O shields
IEEE-1394a connector
on back panel?
Yes
Yes
No
Dimensions are given in inches [millimeters]. The figures indicate the position of each
cutout. Additional design considerations for I/O shields relative to chassis
requirements are described in the ATX specification.
NOTE
The I/O shield drawings are for reference only. I/O shields compliant with the ATX
specification are available from Intel.
PS/2 connectors on
back panel?
Yes
No
No
Technical Reference
For I/O shield
dimensions, see...
Figure 22
Figure 23
Figure 24
69