Location Of The Onboard Power Indicator Leds - Intel BLKDQ965GFEKR Technical Product Specification

1.12.2.10 Onboard Power Indicator LEDs
CAUTION
If AC power has been switched off and the +5 V standby power indicator is still lit,
disconnect the power cord before installing or removing any devices connected to the
board. Failure to do so could damage the board and any attached devices.
CAUTION
When connected to AC power, the memory slots on the board will be powered on and
in use. A red LED (shown in Figure 13), located near the memory slots, will be lit if
the memory slots are powered.
Installing or removing memory while the memory slots are powered may result in
damage to both the memory and the board. Before installing or removing memory,
disconnect the computer from AC power and wait for the LED to go off before
proceeding.
Figure 13 shows the location of the two power indicators:
• +5 V standby power indicator LED. The +5 V standby power indicator LED is lit
when there is standby power still present even when the computer appears to be
off.
• Memory power indicator LED. The memory power indicator LED is lit when there is
power to the memory slots.
Item
A
B
Figure 13. Location of the Onboard Power Indicator LEDs
Description
+5 V standby power indicator LED
Memory power indicator LED
Product Description
A
B
OM18490
LED color
Green
Red
47