Wake-Up Devices And Events - Intel BLKDQ43AP Specification

Intel Desktop Board DQ43AP Technical Product Specification
1.14.1.2

Wake-up Devices and Events

Table 8 lists the devices or specific events that can wake the computer from specific
states.
Table 8. Wake-up Devices and Events
These devices/events can wake up the computer...
LAN
PME# signal
Power switch
RTC alarm
Serial port
USB
WAKE# signal
PS/2 port
Note 1: S4 implies operating system support only. USB ports are turned off during S4/S5 states.
Note 2: The PCI Express WAKE# signal is controlled by the enable/disable option in the BIOS.
NOTE
The use of these wake-up events from an ACPI state requires an operating system
that provides full ACPI support. In addition, software, drivers, and peripherals must
fully support ACPI wake events.
34
...from this state
(Note 1)
S1, S3, S4, S5
(Note 1)
S1, S3, S4, S5
S1, S3, S4, S5
S1, S3, S4, S5
S1, S3
S1, S3
(Note 2)
S1, S3, S4, S5
(Note 1)
S1, S3, S4, S5