Canon 2921B002 On-Screen Manual page 648

Changing the Machine Settings on the LCD
scanning operation may become impossible. To use the machine over network, refer to
your setup manual. Be careful when you initialize the network settings on the machine.
Note
When you initialize the network settings using the Canon IJ Network Tool, refer to
Initializing the Network Settings of the Machine
Advanced settings
Date display
Changes the display format of shooting dates when printed.
Note
When Date ON is selected on the advanced print settings screen in memory card mode,
the shooting date is printed in the date display format you selected. For print settings,
see Setting Items
The shooting date format is as specified in the DPOF setting from DPOF printing.
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
Remove the memory card before changing this setting. For details, see
Card Slot as the Memory Card Drive of the Computer
If you set this setting to Writable from USB PC or Writable from LAN PC, card direct
printing cannot be done. After you finish operation of the memory card dedicated drive, be
sure to set it back to Not writable from PC. When you turn off the machine, Writable from
USB PC or Writable from LAN PC will be canceled and the setting is returned to Not
writable from PC when you turn on the machine next time.
Slide show setting
Specifies the image display quality of the slide show.
Note
When Image quality: Standard is selected, images are displayed at about 5-second
intervals. When Image quality: High is selected, images are displayed at different time
intervals according to their resolutions.
Quiet mode
Enables this function on the machine if you want to reduce the operating noise, such as when
printing at night.
Enabling this function reduces the noises generated while:
Copying,
Printing from a memory card,
Printing from a PictBridge compliant device,
Printing from a wireless communication device, and
Printing a template form.
Important
Printing speed may be reduced compared to when this setting is set to OFF.
This function may not be so effective depending on the print quality setting. Furthermore,
certain noise, such as when the machine is preparing for printing, is not reduced.
Note
The noises generated while scanning or printing from the computer can also be
reduced. To reduce these noises, you need to configure the settings on the computer.
For the noises while scanning, refer to
For the noises while printing from the computer, refer to
Guide display settings
Changes the time before the guidance is displayed on the LCD, or selects not to be
displayed.
.
Scanner Tab
.
Setting Up the
.
.
Reducing the Machine Noise
Page 648 of 815 pages
.