Scanning In Basic Mode - Canon 2921B002 On-Screen Manual

Scanning in Basic Mode

>
Advanced Guide Scanning
ScanGear (Scanner Driver) > Scanning in Basic Mode
Scanning in Basic Mode
In Basic Mode, you can scan easily by following the on-screen steps.
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Starting ScanGear (Scanner Driver)
Important
Place the document face-down on the Platen and align an upper corner of the document with
the corner at the arrow of the Platen.
2.
Set Select Source according to the document placed on the Platen.
Note
To scan magazines containing many color photos, scan in Advanced Mode with Color Mode
set to Color and Descreen set to ON.
Scanning in Advanced Mode
3.
Click Preview.
Preview image appears in the Preview area.
>
Scanning with Other Application Software
> Scanning with Advanced Settings Using
Page 516 of 815 pages