Machine Settings; Print Settings; Advanced Settings - Canon 2921B002 On-Screen Manual

Machine Settings

> > Machine Settings
Contents Other Usages
Machine Settings
This section describes the items you can set or change in Device settings of the Settings menu. For
details on setting or changing, refer to the on-screen manual:
Plain paper feed settings
Selects the paper source (Rear Tray or Cassette) in which you load plain paper. The machine feeds
plain paper from the Cassette by default. Use this setting to change the paper source for plain
paper to the Rear Tray.

Print settings

Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Extended copy amount
Selects the amount of image that extends off the paper when making borderless copies.
LAN settings
Change wireless/wired
Switches between wireless LAN and wired LAN networks.
Wireless LAN settings
Configures the wireless LAN connection with WPS (Wi-Fi Protected Setup) or WCN (Windows
Connect Now). WCN setting is only available for Windows Vista.
For details, refer to the printed manual: Getting Started
Wireless LAN setting list
Displays the wireless LAN network configurations of the machine on the LCD.
Wired LAN setting list
Displays the wired LAN network configurations of the machine on the LCD.
IPv4/IPv6 setting
Configures the IP version (IPv4 or IPv6). We recommend to select IPv4 for general use.
WSD setting
Switches the WSD (a network protocol supported by Windows Vista) configuration (Active or
Inactive).
Reset LAN settings
Sets the network configurations on the machine back to the default.

Advanced settings

Date display
Selects the format of date that is printed or displayed on the screen.
Read/write attribute
Selects whether to use the Card Slot of the machine as the memory card drive of a computer.
Advanced Guide
.
Advanced Guide
.
Page 60 of 815 pages
Troubleshooting