Usb Support; Sata Support; Expandability; Legacy I/O - Intel BLKDH61WWB3 Product Manual

Intel Desktop Board DH61WW Product Guide
Table 3. LAN Status LEDs States
LED
A (Link/Activity)
B (Link Speed)

USB Support

The Desktop Board supports USB 2.0. There are 6 USB 2.0 ports (four ports routed to
back panel connectors and two ports routed to an onboard header). The USB 2.0
ports are high-speed, full-speed, and low-speed capable. USB 2.0 support requires
both an operating system and drivers that fully support USB 2.0 transfer rates.

SATA Support

The board provides four SATA 3.0 Gb/s channels, through the PCH, which support one
device per channel.

Expandability

Intel Desktop Board DH61WW provides the following expansion capability:
• One PCI Express 2.0 x16 interface
• One PCI Express 2.0 x1 interface
• One Conventional PCI bus interface

Legacy I/O

The board's Legacy I/O Controller provides the following legacy features:
• PS/2 back panel connector for mouse/keyboard support
• One serial port header
• One parallel port connector on the back panel
• Serial IRQ interface compatible with serialized IRQ support for Conventional PCI
bus systems
• Intelligent power management, including a programmable wake-up event interface
• Conventional PCI bus power management support
The BIOS Setup program provides configuration options for the Legacy I/O controller.
18
LED Color LED State
Green Off
On
Blinking
N/A Off
Green On
Yellow On
Indicates
LAN link is not established
LAN link is established
LAN activity is occurring
10 Mb/s data rate
100 Mb/s data rate
1000 Mb/s data rate