Playing The Beginning Of Tracks (Scan); Repeating The Same Track (Repeat) - Eclipse CD3434 Owner's Manual

How to operate the receiver with an optional CD changer connected

Playing the beginning of tracks (SCAN)

1
Press button [4].
Pressing the button causes the changer to move up to the next
track and play it for 10 seconds, then move up to the next track
and play it for 10 seconds, and so on, on one CD, until the
button is pressed again.
Hold the button until the [ALL SCAN] display appears to play
the first 10 seconds of the first track of every CD loaded.
•To continue playing a desired track, press the button again to
stop scanning.
ATTENTION
•After the entire disc is scanned once, ordinary playback starts
from the point where scanning started.

Repeating the same track (REPEAT)

1
Press button [5].
Pressing on the button causes the changer to repeat the track
currently being played, until the button is pressed again.
Hold the button until the [ALL RPT] display appears to repeat
all tracks on the CD being played.
Buttons [4] and [5]
70