1.7.2
Parallel Port Header
The parallel port header is implemented as a 26-pin header on the board. Use the
BIOS Setup program to set the parallel port mode.
For information about
The location of the parallel port header
1.8
LAN Subsystem
The LAN subsystem consists of the following:
•
Intel NM10 Express Chipset
•
Realtek 8111DL Gigabit Ethernet Controller for 10/100/1000 Mbits/sec Ethernet
LAN connectivity
•
RJ-45 LAN connector with integrated status LEDs
Additional features of the LAN subsystem include:
•
CSMA/CD protocol engine
•
LAN connect interface that supports the ethernet controller
•
PCI Conventional bus power management
⎯ Supports ACPI technology
⎯ Supports LAN wake capabilities
1.8.1
LAN Subsystem Drivers
LAN drivers are available from Intel's World Wide Web site.
For information about
Obtaining LAN drivers
Product Description
Refer to
Figure 10, page 43
Refer to
Section 1.2, page 16
23