Remote Control Problems; Channel Tuning Problems - Toshiba 39L22U User Manual

If you hear no sound, try setting the MTS feature to Stereo mode.
See "Selecting stereo/SAP broadcasts" on page
If you are not receiving a second audio program from a known SAP
source, make sure the MTS feature is set to SAP mode. See
"Selecting stereo/SAP broadcasts" on page
If you hear audio that seems incorrect for the program you are
watching (such as music or a foreign language), then the SAP mode
may be on. Set the MTS feature to Stereo mode. For instructions,
see "Selecting stereo/SAP broadcasts" on page
If you connect a computer using either the PC IN terminal or an
®
HDMI
See "Connecting a digital audio system" on page

Remote control problems

Remove all obstructions between the remote control and the TV.
Replace the remote control's batteries. For instructions, see
"Installing batteries" on page
Your TV's remote control may not operate certain features on your
external devices. Refer to the User's Guide for your other device to
determine its available features. If your TV remote control does not
operate a specific feature on another device, use the remote control
that came with the device. For more information, see
about the remote control" on page
If the TV still does not act as expected, perform the Reset Factory
Defaults procedure. For instructions, see
Defaults" on page

Channel tuning problems

Ensure that the remote control is set to the correct device mode, see
"Learning about the remote control" on page
The Auto Tuning feature may have erased the channel from
memory. Add the channel to the channel memory. For more
information, see
page 46.
The Lock feature may have blocked the channel. To unblock the
channel, see
If you cannot tune digital channels, check the antenna
configuration. If the problem persists, clear all channels from the
channel list and reprogram channels into memory (see
channels in memory (optional)" on page
information, see
terminal, make sure that the audio setting is properly set.
53.
"Storing channels in memory (optional)" on
"Locking channels" on page
"TV stops responding to controls." on page
Troubleshooting
Remote control problems
78.
35.
37.
"Resetting Factory
90.
46). For additional
117
78.
78.
30.
"Learning
37.
"Storing
114.