Remote Control Problems; Channel Tuning Problems - Toshiba 32L1400U User Manual

100
Troubleshooting

Channel tuning problems

If you hear no sound, try setting the MTS feature to Stereo mode,
see "Selecting stereo/SAP broadcasts" on page 69
If you are not receiving a second audio program from a known SAP
source, make sure the MTS feature is set to SAP mode, see
"Selecting stereo/SAP broadcasts" on page 69
If you hear audio that seems incorrect for the program you are
watching (such as music or a foreign language), the SAP mode may
be on. Set the MTS feature to Stereo mode, see
SAP broadcasts" on page 69

Remote control problems

Remove all obstructions between the remote control and the TV.
Replace the remote control's batteries, see
page 33
Your TV's remote control may not operate certain features on your
external devices. Refer to the User's Guide for your other device to
determine its available features. If your TV remote control does not
operate a specific feature on another device, use the remote control
that came with the device, see
on page 36
If the TV still does not act as expected, perform the Reset Factory
Defaults procedure, see
Channel tuning problems
The Auto Tuning feature may have erased the channel from
memory. Add the channel to the channel memory, see
channels in memory (optional)" on page 44
The Lock feature may have blocked the channel. Unblock the
channel, see
If you cannot tune digital channels, check the antenna configuration.
If the problem persists, clear all channels from the channel list and
reprogram channels into memory, see
(optional)" on page
responding to controls." on page
Reset Factory Defaults procedure, see
on page 48
"Resetting Factory Defaults" on page 48
"Locking channels" on page 77
44. For additional information, see
"Installing batteries" on
"Learning about the remote control"
"Storing channels in memory
97. If the problem persists, use the
"Resetting Factory Defaults"
"Selecting stereo/
"Storing
"TV stops