No Signal Power Down; Using Hdmi ® Cec - Toshiba 39L22U User Manual

NOTE

No Signal Power Down

The TV will automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Off for the
following purposes:
❖
Low signal strength of analog channel (no signal detection)
❖
Only Audio L/R is connected to external input to listen to
music through the TV speakers.
To change the No Signal Power Down setting:
1 From the Preferences menu, highlight Energy Saving
Settings, and then press ENTER.
2 Press the ( /
Down, and then press ENTER.
3 Press the ( /
to change, and then press the ( /
or Off.
NOTE
®
Using HDMI
This is a new feature that uses CEC technology and allows you to
control Toshiba HDMI
remote via HDMI
page 29).
When Enable HDMI
to On (see
CEC functions described below will be enabled.
The
default setting of this feature is Off.
One minute before the TV switches to standby, a warning message
will appear.
When the following features are set, the feature that is set for the
nearest time will function.
❖
Automatic Power Down
❖
Sleep Timer
❖
No signal auto power off (after 15 minutes of no signal)
arrow) buttons to select No Signal Power
arrow) buttons to highlight the item you want
❖
Default setting for this feature is On.
❖
A warning message will appear 1 minute before the TV turns off.
CEC
®
®
connection (see
®
CEC in the HDMI
"Setting up HDMI
Using the TV's features
No Signal Power Down
arrow) buttons to select On
CEC compatible devices from the TV
"HDMI
®
CEC" on page
®
CEC connection" on
®
CEC Setup menu is set
107), the HDMI
103
®