Removing A Disc With The Computer On; Removing A Disc With The Computer Off; Toshiba's Online Resources - Toshiba LX815-D1310 User Manual

Removing a disc with the computer on

To remove an optical disc with the computer turned on:
1 Press the eject button on the drive.
2 Pull the tray out until it is fully open, remove the disc, and
place it in its protective cover.
3 Gently press the tray in to close it.

Removing a disc with the computer off

To remove a disc with the computer turned off:
1 Insert a slender object, such as a straightened paper clip, into
the manual eject hole.
The disc tray slides partially out of the drive.
2 Pull the tray out until it is fully open, remove the disc, and
place it in its protective cover.
3 Gently press the tray in to close it.

Toshiba's online resources

Toshiba maintains a number of online sites to which you can
connect. These sites provide information about Toshiba products,
give help with technical questions and keep you up to date with
future upgrades. For more information, see
on page
Do not press the eject button while the drive in-use indicator light is
glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray, wait for
it to stop spinning before you remove it.
Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it.
122.
Learning the Basics
Toshiba's online resources
"Contacting Toshiba"
65