Samsung LE40D550K1W User Manual page 11

Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first
attach a "Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the
port on the back of your TV. See the illustration below.
USB1 (HDD), USB 2
The LAN Port on the Wall
Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung's Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung
recommends using IEEE 802.11n. When you play the video over a IEEE 802.11b/g connection, the video may not play
smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an access
point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES
(WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification
specifications.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup. They are
illustrated below:
The Modem Port on the Wall
The LAN Port on the Wall
✎
A network speed of lower than 10 Mbps is not supported.
Network Connection
Wireless IP sharer
(wireless router having DHCP
server)
LAN Cable
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
English - 11
Samsung Wireless
LAN Adapter
LAN Cable
LAN Cable
USB
TV Side Panel
TV Rear Panel
TV Rear Panel
or