Page 1
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.
Contents CONNECTING AND PREPARING YOUR TV List of Parts ... 3 Installing the Stand ... 3 Installing the Wall Mount Kit ... 3 Viewing the Control Panel ... 4 Viewing the Connection Panel ... 5 Viewing the Remote Control ... 7 Installing Batteries in the Remote Control ...
Page 4
WISELINK Using the WISELINK Function ... 26 Using the WISELINK Menu ... 27 Using the PHOTO (JPEG) List ... 27 Viewing Photo File Information ... 29 Selecting a Photo and Slide Show... 29 Rotating ... 30 Zooming-in ... 31 Copying Image Files ... 32 Deleting Image Files ...
Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Viewing the Control Panel The product colour and shape may vary depending on the model. SOURCE Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control.
Viewing the Connection Panel [Rear Panel Jacks] Power Input Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network...
Page 8
Connecting Set-Top Box, VCR or DVD - Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD. - If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.
4. Is there a power outage, or is the power cord unplugged? 5. Is there a special fluorescent light or neon sign nearby? Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR) (Refer to page 48~52)
Switching On and Off The mains lead is attached to the rear of your set. Plug the mains lead into an appropriate socket. The standby indicator lights up on the front of the set. Press the button on the front of the set. You also can press the POWER The programme that you were watching last is reselected automatically.
Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. Press the MENU button to display the menu.
Press the button to select “Colour System”, then press the ENTER button. Select the colour standard required by pressing the Press the button to select “Sound System”, then press the ENTER button. Select the sound standard required by pressing the If there is an abnormal sound or no sound, re-select the sound system required.
Activating the Child Lock Sorting the Stored Channels This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control away from children.
Assigning Channels Names Fine Tuning Channel Reception Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. Press the MENU button to display the menu. Press the button to select “Channel”, then press the ENTER button. Press the button to select “Name”, then press the ENTER button.
Using the LNA (Low Noise Amplifier) Feature Changing the Picture Standard You can also press the P.MODE button on the remote control to select one of the picture settings. Adjusting the Custom Picture This function is very useful in the situation that the TV is used in a weak signal area. LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier boosts the incoming signal.
Changing the Colour Tone Adjusting the Color Tone with the Preferred Color Component You can select the most comfortable colour tone to your eyes. To select the desired picture effect, follow the “Changing the Picture Standard” instructions number 1 to 3 on page 13. Press the button to select “Colour Tone”, then press the ENTER button.
Resetting the Picture Settings to the Factory Defaults Changing the Picture Size You can select these options by simply pressing the P.SIZE button on the remote control. You can return to the factory defaults picture settings. To select the desired picture effect, follow the “Changing the Picture Standard” instructions number 1 to 3 on page 13.
Press the ENTER button. Press the EXIT button to exit. Samsung’s new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On.
Changing the Colour Space Changing the LCD 100Hz Freezing the Current Picture Colour space is a colour matrix composed of red, green, and blue colours. Select your favorite colour space and experience the world of natural colour. Press the MENU button to display the menu. Press the button to select “Picture”, then press the ENTER button.
Viewing the Picture In Picture (PIP) Press the PIP button on the remote control repeatedly to activate or deactivate the “PIP”. You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.
Changing the Sound Standard You can also select these options by simply pressing the S.MODE button on the remote control. Adjusting the Sound Settings Setting the TruSurround XT (SRS TSXT) You can also set these options simply by pressing the SRS button on remote control.
Adjusting the Volume Automatically Selecting the Internal Mute Listening to the Sound of the Sub Picture Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature allows you to automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Resetting the Sound Settings to the Factory Defaults Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Selecting the Sound Mode You can also set these options simply by pressing the DUAL button on remote control.
Setting the Sleep Timer Switching the Television On and Off Automatically You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. Press the MENU button to display the menu. Press the button to select “Setup”, then press the ENTER button.
Choosing Your Language Using Game Mode When you start using your set for the first time, you must select the language which will be used for displaying menus and indications. Press the MENU button to display the on-screen menu. Press the button to select “Setup”, then press the ENTER button.
Setting the Blue Screen Mode / Selecting the Melody Using the Energy Saving Feature Setting the Blue Eye Blue Screen: If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen"...
Selecting the Source Editing the Input Source Names You can select among external sources connected to your TV’s input jacks. Press the MENU button to display the menu. Press the ENTER button, to select “Input”. Press the ENTER button again, to select “Source List”. When no external device is connected to your set, only “TV”, “Ext.1”, “Ext.2”, "DTV"...
Using the WISELINK Function You can view stored photos (JPEG files) or play music files (MP3) using a memory card or USB storage media. The "Photo" menu supports image files in the JPEG format only. The "Music" menu supports sound files in the MP3 format only. First, connect the memory card or USB storage media containing your files to the WISELINK terminal on the side of the TV.
Using the WISELINK Menu Using the PHOTO (JPEG) List folder icon photo icon Move to the previous folder stage icon This menu shows JPEG and MP3 files and folders saved on a memory card. Press the MENU button to display the menu. Press the ENTER button, to select “Input”.
Page 30
Using the Options Menu "Slide Show": Starts a slide show. (Refer to “Selecting a Photo and Slide Show” on page 29) "Rotate": You can rotate images in full screen mode. Images are rotated in the order of 90°, 180°, 270° and 0° (original state). (Refer to “Rotating”...
Viewing Photo File Information Selecting a Photo and Slide Show You can select these options by simply pressing the WISELINK button on the remote control. Normal When selecting a photo file, the photo file information is displayed on the left in the TV screen, such as the resolution, the date modified and the order of the file in the current directory.
Rotating You can select these options by simply pressing the WISELINK button on the remote control. "Background Music Setting": The saved file information is displayed as folder or MP3 file. Select the "Background Music Settings" and press the ENTER button. Navigate to the folder that contains the MP3 files to use as the background music.
Zooming-in You can select these options by simply pressing the WISELINK button on the remote control. Displays a 2x, 3x or 4x zoomed-in image in full screen mode. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 27) Press the button to select “Photo”, then press the ENTER button.
Copying Image Files You can select these options by simply pressing the WISELINK button on the remote control. Deleting Image Files You can select these options by simply pressing the WISELINK button on the remote control. You can copy image files to a different memory card. Complete Steps 1 to 4 of "Using the WISELINK Menu".
Printing a Photo You can select these options by simply pressing the WISELINK button on the remote control. Using the MP3 List folder icon musical note icon Move to the previous folder stage icon You can select these options by simply pressing the WISELINK button on the remote control.
Copying Music Files Deleting Music Files Music function information Current OSD (Music) Play/Pause (Music) Stop You can copy music files to a different memory card. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 27) Press the button to select “Music”, then press the ENTER button.
Using the Setup Menu You can select these options by simply pressing the WISELINK button on the remote control. Setup displays the user settings of the WISELINK menu. Complete Steps 1 to 4 of "Using the WISELINK Menu". (Refer to page 27) Press the button to select “Setup”, then press the ENTER button.
Previewing the DTV Menu System You can select these options by simply pressing the D.MENU button on the remote control. Updating the Channel List Automatically To help you navigate around the on-screen menu system and adjust the various settings available, refer to the following illustration. Available in the Digital TV mode.
Updating the Channel List Manually Editing Your Favourite Channels You can specify the channel or frequency for a fast channel search. Press the D.MENU button to display the DTV menu. Press the button to select "Channel", then press the ENTER button. Press the button to select "Manual Store", then press the ENTER button.
Selecting Channel Manager You can select these options by simply pressing the CH MGR button on the remote control. Move Press the D.MENU button to display the DTV menu. Press the button to select "Channel", then press the ENTER button. Press the button to select "Edit Favourite Channels", then press the ENTER button.
Displaying Programme Information Viewing the EPG (Electronic Programme Guide) Information While viewing a channel, additional information about the current programme may be displayed. While viewing a programme, press the INFO button. The programme information is displayed. To exit from banner information, press the INFO button. The EPG (Electronic Programme Guide) information is provided by the broadcasters.
Using the Scheduled List Setting the Default Guide You can select these options by simply pressing the GUIDE button on the remote control. If you make a scheduled viewing list of programs you may like to see, the channel will be automatically switched to the scheduled program at the scheduled time even if you are watching another program.
Viewing All Channels and Favourite Channels Choosing Your Language In the EPG menu, you can display all channels or favourite channels. Press the D.MENU button to display the DTV menu. Press the ENTER button again, to select "Guide". Select the your required guide ("Now & Next Guide" or "Full Guide") by pressing the button.
Adjusting the Translucency Level Setting up the Parental Lock You can set the translucency of the menu. Press the D.MENU button to display the DTV menu. Press the button to select "Preference", then press the ENTER button. Press the button to select "Translucency Level", then press the ENTER button.
While viewing a programme, the subtitle can be selected. While viewing a programme, audio languages can be selected. You can view your product information. For service or repair, please contact a Samsung approved dealer. Press the D.MENU button to display the DTV menu.
Checking the Signal Information Upgrading the Software (Option) You can get information about the signal status. Press the D.MENU button to display the DTV menu. Press the button to select "System", then press the ENTER button. Press the button to select "Signal Information", then press the ENTER button.
Viewing Common Interface Selecting the CI (Common Interface) Menu Resetting This contains information on CAM inserted in the CI slot and displays it. Press the D.MENU button to display the DTV menu. Press the button to select "System", then press the ENTER button. Press the button to select "Common Interface", then press the ENTER button.
Teletext Decoder Displaying the Teletext Information Most set channels carry “ Teletext ”, pages of written information that provide information such as: Television programme times. News bulletins and Weather forecasts. Sports results. Subtitles for the hard of hearing. The Teletext pages are organized according to six categories: Part Contents Selected page number.
Selecting a Specific Teletext Page Using Fastext to Select a Teletext Page Press the number buttons on the remote control to enter the page number directly: Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence.
Setting Up Your Remote Control After it has been set up properly, your remote control can operate in five different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.
Page 51
Setting Up the Remote to Operate Your DVD Turn off your DVD. Press the DVD button on your TV’s remote control. Press the SET button on your TV’s remote control. Using the number buttons on your remote control, enter three digits of the DVD code listed on page 51~52 of this manual for your brand of DVD.
Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) First, click on “Control Panel” on the Windows start menu.
Setting the PC Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.
Using the Anti-Theft Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer.
Operating Humidity Storage Temperature Storage Humidity Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus. LE32M7 32 inch AC 220-240 V, 50 Hz 155 W 1360 x 768 @ 60 Hz...
Page 59
Table des matières CONNEXION ET PREPARATION DE VOTRE TELEVISEUR Liste de pièces ... 3 Installation du support ... 3 Installation du kit de montage mural ... 3 Présentation du panneau de commande ... 4 Présentation du panneau de branchement ... 5 Présentation de la télécommande ...
Page 60
WISELINK Utilisation de la fonction WISELINK... 26 Utilisation du menu WISELINK ... 27 Utilisation de la liste Photo (JPEG) ... 27 Affichage des informations d’un fichier photo ... 29 Sélection d’une photo et d’un diaporama ... 29 Rotation ... 30 Zoom avant ...
Faites appel à un technicien pour obtenir de l’assistance lors de l’installation du support mural. Samsung Electronics n’est pas responsable de tout dommage au produit ou toute blessure sur vous-même ou une autre personne si vous choisissez d’installer le téléviseur vous-même.
Présentation du panneau de commande La couleur et la forme du produit peuvent varier en fonction du modèle. SOURCE Bascule entre toutes les sources d’entrée disponibles. (TV, Ext.1, Ext.2, AV, S-Vidéo, Composant, PC, HDMI1, HDMI2, DTV). Dans le menu à l’écran, utilisez ce bouton de la même manière que le bouton ENTER de la télécommande.
Présentation du panneau de branchement [Prises du panneau arrière] Entrée de l’alimentation Lorsque vous raccordez un appareil externe au téléviseur, assurez-vous que l’appareil est arrêté. Lorsque vous connectez un périphérique externe, faites correspondre les couleurs du terminal de connexion et du câble. Branchement à...
Page 64
Branchement d’un boîtier déCodeur, d’un magnétoscope ou d’un lecteur DVD - Connectez le câble SCART (en option) du magnétoscope ou du lecteur DVD au connecteur SCART de ces appareils. - Si vous souhaitez brancher en même temps le boîtier déCodeur et le magnétoscope (ou lecteur de DVD), branchez ces appareils ensemble puis connectez le magnétoscope (ou le lecteur de DVD) à...
4. Y a-t-il une coupure d’alimentation ou le cordon d’alimentation est-il débranché ? 5. Y a-t-il une lampe fluorescente ou un néon à proximité ? Sélectionne le périphérique de destination à régler à l’aide de la télécommande Samsung (TV, DVD, STB, CABLE, VCR) (voir page 48~52) Bouton de veille du téléviseur Boutons numériques d’accès direct aux chaînes...
Mise en marche et arrêt Le câble relié au secteur est fixé à l’arrière du téléviseur/moniteur. Relier le câble principal à la prise appropriée. L’indicateur de veille situé à l’avant du téléviseur s’allume. Appuyez sur le bouton à l’avant du téléviseur. Vous pouvez également appuyer sur le bouton POWER Le dernier programme que vous avez regardé...
Mémorisation automatique des chaînes Vous pouvez chercher les plages de fréquences disponibles par balayage (leur disponibilité dépend de votre pays). Il est possible que les numéros de programmes alloués automatiquement ne correspondent pas aux numéros de programmes souhaités ou actuels. Vous pouvez toutefois organiser les numéros manuellement et effacer les chaînes que vous ne souhaitez pas regarder. Appuyez sur le bouton MENU pour afficher le menu.
Appuyez sur le bouton Sélectionnez les couleurs normalisées voulues en appuyant de façon répétée sur la touche Appuyez sur le bouton Sélectionnez la norme audio voulue en appuyant de façon répétée sur la touche S’il n’y a aucun son ou si le son est anormal, re-sélectionnez la norme Son requise. Si vous connaissez le numéro de la chaîne à...
Activation du verrouillage parental Organisation des canaux mémorisés Cette fonction vous permet d’empêcher que des utilisateurs non autorisés, tels que des enfants, regardent des programmes inappropriés en désactivant la vidéo et l’audio. Le verrouillage parental ne peut pas être désactivée à l’aide des boutons du panneau latéral. La télécommande étant le seul moyen de désactiver la sécurité...
Attribution de noms aux canaux Réception nette des chaînes grâce au réglage fin Les noms de chaînes sont attribués automatiquement lorsque les informations des chaînes sont émises. Ces noms peuvent être changés, vous autorisant à attribuer de nouveaux noms. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur le bouton pour sélectionner "Canal”, puis sur la touche ENTER.
Utilisation de la fonction LNA (Amplificateur à faible bruit) Modification de l’image standard Vous pouvez également appuyer sur le bouton P.MODE de la télécommande pour sélectionner l’une des configurations d’image. Réglage de l’image personnalisée Cette fonction se révèle particulièrement utile si le signal TV est faible. La fonction LNA (amplificateur à...
Changement de la nuance de couleur Réglage des nuances de couleur avec le composant Couleur préférée Vous pouvez sélectionner la nuance de couleur qui vous convient le mieux. Pour sélectionner l’effet visuel souhaité, observez les instructions 1 à 3 dans la section "Modification de l’image standard” à la page 13. Appuyez sur le bouton la touche ENTER.
Rétablir les paramètres de réglage de l’image d’usine. Changement de la taille de l’image Vous pouvez également choisir ces options en appuyant sur la touche P.SIZE de la télécommande. Vous pouvez rétablir les réglages de l’image définis par défaut en usine. Pour sélectionner l’effet visuel souhaité, observez les instructions 1 à...
Appuyez sur le bouton ENTER. Appuyez sur le bouton EXIT pour quitter le menu. La nouvelle technologie de Samsung vous apporte des images plus détaillées avec une amélioration des contrastes et des blancs. Le nouvel algorithme de compensation d’images vous donne une image plus lumineuse et plus claire.
Modification de l’espace couleur Changement du LCD 100Hz Sélection du format de l’image L’espace couleur est une matrice de couleurs composée de rouge, de vert et de bleu. Sélectionnez votre espace couleur préféré et appréciez le monde de la couleur naturelle. Appuyez sur le bouton MENU pour afficher le menu.
Affichage de l’Image dans l’image (PIP) Appuyez plusieurs fois sur le bouton PIP de la télécommande pour activer ou désactiver le mode "PIP”. Vous pouvez afficher une image secondaire dans l’image principale du programme télévisé ou de l’entrée vidéo. De cette manière, vous pouvez regarder le programme télévisé ou l’entrée vidéo depuis n’importe quel équipement branché...
Changement de la norme Son Vous pouvez également sélectionner ces options en appuyant simplement sur le bouton S.MODE de la télécommande. Réglage des paramètres du son Paramétrage de la technologie TruSurround XT (SRS TSXT) Vous pouvez également paramétrer ces options en appuyant sur la touche SRS de la télécommande.
Réglage automatique du volume Sélection du mode Silence Int. Ecoute du son accompagnant l’image secondaire Chaque station de radiodiffusion possède ses propres conditions d’émission de signal. Il vous faut alors régler le volume à chaque fois que vous changez de chaîne. Cette fonction vous permet de régler automatiquement le volume de la chaîne désirée en réduisant la puissance sonore lorsque le signal de modulation est élevé...
Rétablir les paramètres de son par défaut Connexion du casque Sélection du mode sonore (Sound) Vous pouvez également configurer ces options en appuyant sur le bouton DUAL de votre télécommande. Réglage et affichage de l’heure Si le mode Jeu est activé, la fonction Réinitialiser le son est disponible.
Réglage de la minuterie de mise en veille Marche et arrêt automatique du téléviseur Vous pouvez sélectionner une durée comprise entre 30 et 180 minutes à l’issue de laquelle le téléviseur passera automatiquement en mode veille. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur le bouton pour sélectionner "Configuration”, puis sur la touche ENTER.
Choix de la langue Utilisation du Mode Jeu Composant Mode Jeu Lorsque vous utilisez le téléviseur pour la première fois, vous devez sélectionner la langue utilisée pour afficher les menus et les indications. Appuyez sur le bouton MENU pour afficher le menu affiché à l’écran. Appuyez sur le bouton pour sélectionner "Configuration”, puis sur la touche ENTER.
Réglage du mode d’écran bleu / Sélection de mélodie Utilisation de la fonction d’économie d’énergie Réglage du mode Blue Eye (Yeux bleus) Ecran Bleu: Si aucun signal n’est reçu ou si le signal est très faible, un écran bleu remplace automatiquement l’arrière-plan de l’image parasité.
Sélection de la source Modification du nom d’une source d’entrée Vous pouvez sélectionner l’une des sources externes connectées aux prises d’entrée de votre téléviseur. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur le bouton ENTER pour sélectionner "Entrée”. Appuyez de nouveau sur le bouton ENTER pour sélectionner "Liste Source”.
Utilisation de la fonction WISELINK Vous pouvez afficher des photos (fichiers JPEG) ou lire des fichiers audio (MP3) à l’aide d’une carte mémoire ou d’un périphérique de stockage USB. Le menu " Photo" prend en charge les fichiers images au format JPEG uniquement. Le menu "...
Utilisation du menu WISELINK Utilisation de la liste Photo (JPEG) Icône de dossier Icône de photo Icône Revenir au niveau de dossier précédent Ce menu présente les fichiers JPEG et MP3 ainsi que les dossiers enregistrés sur une carte mémoire. Appuyez sur le bouton MENU pour afficher le menu.
Page 86
Utilisation du menu Options "Diaporama": Lance un diaporama. (reportez-vous à la section "Sélection d’une photo et d’un diaporama", page 29). "Rotat." : Vous pouvez faire pivoter les images lorsque vous êtes en mode Plein écran. Les images peuvent pivoter de 90°, 180°, 270° et 0° (sens d’origine) (reportez-vous à...
Affichage des informations d’un fichier photo Sélection d’une photo et d’un diaporama Vous pouvez sélectionner ces options en appuyant simplement sur le bouton WISELINK de la télécommande. Normal Marche Lorsque vous sélectionnez un fichier photo, les informations le concernant s’affichent à gauche de l’écran du téléviseur, notamment la résolution, la date de modification et l’ordre du fichier dans le répertoire courant.
Rotation Vous pouvez sélectionner ces options en appuyant simplement sur le bouton WISELINK de la télécommande. "Paramètres du fond musical" : Les informations relatives au fichier enregistré s’affichent sous forme de dossier ou de fichier MP3. Sélectionnez "Paramètres du fond musical" et appuyez sur le bouton ENTER. Naviguez jusqu’au dossier contenant les fichiers MP3 à...
Zoom avant Vous pouvez sélectionner ces options en appuyant simplement sur le bouton WISELINK de la télécommande. Affiche en plein écran la photo agrandie par un zoom X2x, 3x ou 4x. Observez les étapes 1 à 4 de la procédure "Utilisation du menu WISELINK". (voir page 27). Appuyez sur le bouton bouton ENTER.
Copie de fichiers images Vous pouvez sélectionner ces options en appuyant simplement sur le bouton WISELINK de la télécommande. Suppression de fichiers images Vous pouvez sélectionner ces options en appuyant simplement sur le bouton WISELINK de la télécommande. Vous pouvez copier des fichiers images sur une carte mémoire différente Observez les étapes 1 à...
Impression d’une photo Vous pouvez sélectionner ces options en appuyant simplement sur le bouton WISELINK de la télécommande. Utilisation de la liste MP3 Icône de dossier Icône de note de musique Icône Revenir au niveau de dossier précédent Vous pouvez sélectionner ces options en appuyant simplement sur le bouton WISELINK de la télécommande.
Copie de fichiers audio Suppression de fichiers audio Informations sur la fonction Musique OSD courant (Musique) Lecture/Pause (Musique) Stop Vous pouvez copier des fichiers audio sur une carte mémoire différente. Observez les étapes 1 à 4 de la procédure "Utilisation du menu WISELINK ". (voir page 27). Appuyez sur le bouton puis appuyez sur le bouton ENTER.
Utilisation du menu de configuration (Setup) Vous pouvez sélectionner ces options en appuyant simplement sur le bouton WISELINK de la télécommande. Ce menu affiche les paramètres utilisateur pour le menu WISELINK. Observez les étapes 1 à 4 de la procédure "Utilisation du menu WISELINK ". (voir page 27). Appuyez sur le bouton puis appuyez sur le bouton ENTER.
Aperçu du système de menu DTV Vous pouvez sélectionner ces options en appuyant sur le bouton D.MENU de votre télécommande. Mise à jour automatique de la liste des chaînes Pour savoir comment naviguer dans le système de menus sur écran et ajuster les différents réglages disponibles, reportez-vous à...
Mise à jour manuelle de la liste des chaînes Modification de vos chaînes favorites Vous pouvez spécifier la chaîne ou la fréquence pour une recherche de chaînes rapide. Appuyez sur le bouton D.MENU pour afficher le menu DTV. Appuyez sur le bouton pour sélectionner “Canal”, puis sur la touche ENTER.
Modif. les canaux favoris Modif. les canaux favoris Modif. les canaux favoris Sélection du Gestionnaire des tâches Vous pouvez sélectionner ces options en appuyant sur le bouton CH MGR de votre télécommande. Déplacement Appuyez sur le bouton D.MENU pour afficher le menu DTV. Appuyez sur le bouton pour sélectionner “Canal”, puis sur la touche ENTER.
Affichage des informations sur l’émission Affichage des informations du guide électronique des programmes (EPG) Lorsque vous regardez une chaîne, des informations supplémentaires au sujet de l’émission en cours peuvent s’afficher. Lorsque vous regardez un programme, appuyez sur le bouton INFO. Les informations sur l’émission s’affichent.
Utilisation de la liste de programmation Réglage du guide par défaut Vous pouvez sélectionner ces options en appuyant sur le bouton GUIDE de votre télécommande. Si vous créez une liste de programmation des émissions que vous aimeriez regarder, la chaîne de l’émission programmée est activée automatiquement à...
Affichage de toutes les chaînes ou des chaînes favorites Choix de la langue Préférence Dans le menu EPG, vous pouvez afficher toutes les chaînes ou vos chaînes favorites. Appuyez sur le bouton D.MENU pour afficher le menu DTV. Appuyez sur le bouton ENTER pour sélectionner “Guide”. Sélectionnez le guide désiré...
Réglage du niveau de transparence Configuration du verrouillage parental Vous pouvez régler la transparence du menu. Appuyez sur le bouton D.MENU pour afficher le menu DTV. Appuyez sur le bouton pour sélectionner “Préférence”, puis sur la touche ENTER. Appuyez sur le bouton pour sélectionner “Niceau de transparence”, puis sur la touche ENTER.
Lorsque vous regardez une émission, vous pouvez choisir la langue de l’audio. Vous pouvez afficher les informations relatives à votre appareil. Pour un entretien ou une réparation, contactez un revendeur agréé Samsung. Appuyez sur le bouton D.MENU pour afficher le menu DTV.
Vérification des informations sur le signal Mise à jour du logiciel (option) Vous pouvez obtenir des informations sur l’état du signal. Appuyez sur le bouton D.MENU pour afficher le menu DTV. Appuyez sur le bouton pour sélectionner “Système”, puis sur la touche ENTER. Appuyez sur le bouton pour sélectionner “Informations de signal”, puis sur la touche ENTER.
Affichage de l’interface commune Infos sur l’application Sélection du menu CI (Interface commune) Réinitialisation Cette fonction affiche les informations stockées sur le module CAM inséré dans le logement CI. Appuyez sur le bouton D.MENU pour afficher le menu DTV. Appuyez sur le bouton pour sélectionner “Système”, puis sur la touche ENTER.
DéCodeur télétexte Affichage des informations Télétexte La plupart des chaînes du téléviseur possèdent des pages "télétexte” fournissant des informations telles que : Les horaires des programmes télévisés. Bulletins d’informations et prévisions météo. Des résultats sportifs. Des sous-titres pour les malentendants. Les pages télétextes sont organisées en six catégories Part Table des matières...
Sélection d’une page télétexte spécifique Utilisation du système Fastext pour sélectionner une page télétexte Appuyez sur les touches numériques de la télécommande pour entrer directement le numéro de page : Entrez le numéro de page à trois chiffres figurant dans la table des matières en appuyant sur les boutons numériques correspondants.
Programmation de la télécommande Une fois configurée, votre télécommande peut fonctionner dans cinq modes différents : Téléviseur, Magnétoscope, Câble, Lecteur DVD ou DéCodeur. Une pression sur le bouton correspondant de la télécommande vous permet de basculer entre ces différents modes et de contrôler l’appareil de votre choix. La télécommande peut ne pas être compatible avec tous les lecteurs DVD, magnétoscopes, boîtes de jonction et déCodeurs.
Page 107
Configuration de la télécommande pour faire fonctionner votre lecteur DVD Éteignez votre lecteur DVD. Appuyez sur la touche DVD de la télé-commande du téléviseur. Appuyez sur la touche SET de la télé-commande du téléviseur. Appuyez sur les touches numériques de votre télécommande qui correspondent aux trois chiffres du Code du lecteur DVD dont les marques sont répertoriées à...
Windows et votre carte vidéo. Même si vos écrans sont différents, des informations de configuration de base identiques seront applicables dans pratiquement tous les cas. (Si ce n’est pas le cas, contactez le fabricant de votre ordinateur ou un revendeur Samsung.) Cliquez sur "Control Panel” dans le menu Démarrer de Windows.
Sélection du PC Réglage de base et réglage fin de l’image (Verrouillage Image) : Le but du réglage de la qualité de l’image est d’éliminer ou de réduire le bruit parasite de l’image (défauts). Si le bruit parasite n’est pas éliminé en effectuant uniquement une syntonisation fine, réglez la fréquence du mieux que vous pouvez (approximative) puis effectuez à...
Utilisation du verrouillage Kensington antivol Le verrou Kensington est un dispositif permettant de fixer le système lorsqu’il est utilisé dans un lieu public. Le dispositif de verrouil- lage doit être acheté séparément. Il se peut que l’apparence et la méthode de verrouillage soient différents de l’illustration en fonc- tion du fabricant.
Température de stockage Humidité de stockage Le design et les spécifications peuvent changer sans préavis. Ce périphérique est un appareil numérique de classe B. LE32M7 32 pouces AC 220-240 V, 50 Hz 155 W 1360 x 768 @ 60 Hz...
Page 115
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.