Receiving Faxes Manually - Epson Expression Photo XP-850 User Manual

User's Guide
A
Load A4-size plain paper in the cassette.
"Loading Paper" on page 24
&
B
Make sure Auto Answer is set to On.
Setup > Fax Settings > Receive Settings > Auto Answer > On
Note:
❏ When an answering machine is connected directly to this product, make sure you set Rings to Answer correctly
using the following procedure.
❏ Depending on the region, Rings to Answer may be unavailable.
C
Enter Setup mode from the Home menu.
D
Select Fax Settings.
E
Select Communication.
F
Select Rings to Answer.
G
Press + or - to select the number of rings, and then select Done.
c
Important:
Select more rings than needed for the answering machine to pick up. If it is set to pick up on the fourth ring, set the
product to pick up on the fifth ring or later. Otherwise the answering machine cannot receive voice calls.
Note:
When you receive a call and the other party is a fax, the product receives the fax automatically even if the answering machine
picks up the call. If you pick up the phone, wait until the LCD screen displays a message saying that a connection has been
made before you hang up. If the other party is a caller, the phone can be used as normal or a message can be left on the
answering machine.

Receiving faxes manually

If your phone is connected to the product, and Auto Answer mode has been set to Off, you can receive fax data after the
connection is made.
A
Load A4-size plain paper in the cassette.
"Loading Paper" on page 24
&
Faxing
95