2.2.8
Internal connectors
1.
Intel
H77 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1/2 [gray])
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
chipset.
P8H77-M PRO
P8H77-M PRO Intel
•
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.5.3 SATA Configuration for details.
Before creating a RAID set, refer to section 4.5 RAID configurations or the manual
•
bundled in the motherboard support DVD.
•
When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section
3.5.3 SATA Configuration for details.
•
You must install Windows
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows
ASUS P8H77-M PRO
Rapid Storage Technology through the onboard Intel
®
SATA 6.0Gb/s connectors
®
®
XP Service Pack 3 or later versions before using Serial
XP SP3 or later versions.
®
H77
®
2-21