Installation - Haier HDY-C70 ME Operation Manual

Installation

Installation
Dimensions Dimensions
a = 855 mm a = 855 mm
b = 620 mm b = 620 mm
c = 595 mm c = 595 mm
Weight = 43 kg Weight = 43 kg
Packing accessories Packing accessories
Checklist of the accessories and materials provided with the machine: Checklist of the accessories and materials provided with the machine:
Owner's Owner's Certificate of Certificate of
Name Name
manual manual Conformity Conformity
Quantity Quantity
To ensure the dryer operates normally, attention must be paid to the To ensure the dryer operates normally, attention must be paid to the
following instructions; following instructions;
The dryer must be level when installed. Its bottom is equipped with The dryer must be level when installed. Its bottom is equipped with
adjustable feet. Adjust these 4 feets to level the unit before operation adjustable feet. Adjust these 4 feets to level the unit before operation
Check whether there is any damage to the dryer during transportation. Check whether there is any damage to the dryer during transportation.
Any damaged dryer must not be used. if the unit is damaged, contact Any damaged dryer must not be used. if the unit is damaged, contact
your dryer supplier; your dryer supplier;
The dryer must be kept away from flammable substances The dryer must be kept away from flammable substances
The surrounding environment must be dry and ventilated; The surrounding environment must be dry and ventilated;
To allow the dryer to perform better, the ambient temperature must not be To allow the dryer to perform better, the ambient temperature must not be
lower than 10 lower than 10 nor higher than 35 nor higher than 35
b b
c c
Drainpipe Drainpipe
Installation Installation
Reversible Door Reversible Door
This unique feature allows you to install the dryer in the most convenient position
in you home its opening direction may be changed. The procedure is as follows: its opening direction may be changed. The procedure is as follows:
1. Unscrew the 4 hinge screws holding the door onto the machine and remove 1. Unscrew the 4 hinge screws holding the door onto the machine and remove
the door. the door.
2. Unscrew the door and prise out the catch cover on the opposite side 2. Unscrew the door and prise out the catch cover on the opposite side
of the door and transpose them. of the door and transpose them.
3. Unscrew the door hinges and prise out the hinge covers on the opposite side 3. Unscrew the door hinges and prise out the hinge covers on the opposite side
of the door and transpose them. of the door and transpose them.
4. Remove the 4 blanking plugs from the screw holes on the machine and insert 4. Remove the 4 blanking plugs from the screw holes on the machine and insert
them in the holes on the other side. them in the holes on the other side.
5. Refit the door on the opposite side of the machine. 5. Refit the door on the opposite side of the machine.
a-door hinge a-door hinge b-catch cover b-catch cover
d-hinge cover e-door catch d-hinge cover e-door catch
c-door c-door
f-blanking plug f-blanking plug