Name of parts Program selector Container handle HDY-C70/HDY-C70 ME Door Table of Contents Before using the dryer Name of parts........1 Plinth Important Safety Instructions ..2-3 Installation........4-6 Preparation ........7 Earth terminal Back plate How to operate the dryer Power supply cable Control panel.........8-9...
Important safety instructions Important safety instructions To reduce the risk of fire, electrical shock, or injury to 17.If the supply cord is damaged,it must be replaced by the manufacturer ,its service agent persons when using this dryer, follow basic precautions,including or similarly qualified persons in order to avoid a hazard.
Installation Installation Installation Installation Dimensions Dimensions Reversible Door Reversible Door a = 855 mm a = 855 mm This unique feature allows you to install the dryer in the most convenient position b = 620 mm b = 620 mm in you home its opening direction may be changed.
Installation Preparation Drain switchover Attention Before use, clean any deposits from inside the drum of the dryer with During the drying of the laundry, the condensate water is automatically a wet towel; collected in the box inside the machine, the water needs to Clean debris on the filter screen to increase the drying efficiency.
Control panel Control panel G - Programme progress display Depending on the programme selected, the drying stage reached is shown by the indicator lamps on the control panel: - Drying - Ready to iron - Airing - End/Anti-crease At the end of a programme,the End/Anti-crease indicator lamp comes on. The drum will continue to rotate at intervals to prevent laundry creasing, if you A - Program selector Turn this knob to choose the drying program you desire.
Programming guide Drying methods 1.Turning on power Type of Laundry Program Degree of drying Max. load Insert the power plug into an appropriate wall socket and turn on the power. Operating power supply: (220-240)V/50Hz. COTTON Heavy cotton fabrics, sheets, Extra dry 7 kg Very dry 2.
Cleaning and maintenance Cleaning and maintenance 1 Cleaning the surface -Using a coin or other tool, push the slides on the cover to the position Wipe the body of the dryer and the control panel with a damp cloth. as shown in the figure and then remove the cover; Remember not use any organic solvent or corrosive agent to avoid -Turn the condenser's handle 90 degrees in the direction as shown in damage to the machine.
Trouble shooting Trouble shooting Prompt and Alarm Information The following must be confirmed before calling for service: In case of an improper operation or problem with the machine when it operates, the code corresponding to the problem will be displayed on the screen: Problem Possible Cause...