Setting Auto Fit Style - Brother P-touch PT-2030 User Manual

EDITING A LABEL
Attribute
Line
Align
(Alignment)

Setting Auto Fit Style

When "Size" is set to "Auto" and "Length" is set to a specific length, you can select
the way of reducing the text size to fit within the label length.
When "Text Size" is selected, the total text size is modified to fit within the label.
When "Text Width" is selected, the text width will be reduced to the size of x1/2
setting. (If further size reduction is required to fit the text into the selected label
length, the total text size will be modified after reducing the text width to x1/2 setting.)
1
Press the Setup key to display the Setup menu, Select "Auto Fit Style" using the
or
The Auto Fit Style screen is displayed.
2
Select the style using the
3
Press the OK or Enter key to apply the setting.
• Press the Escape key to return to the previous step.
• Press the Space key to set the style to the default setting ("Text Size").
28
Setting Character Attributes
Value
Off
UND
(Underline)
STR
(Strikeout)
Left
Center
Right
Just
(Justify)
key, and then press the OK or Enter key.
or key.
Result