Setting Auto Fit Style; Setting Frame - Brother PT-H500 User Manual

Setting Auto Fit Style

When "Size" of the Font key is set to "Auto" and "Length" of the Label key is set to a specific
length, you can select the way to reduce the text size to fit within the label length.
1
Press the Menu key, select "Auto Fit Style" using the
OK or Enter key.
2
Select the style using the
When "Text Size" is selected, the total text size is modified to fit within the label.
When "Text Width" is selected, the text width will be reduced to the size of "x
1/2" setting. (If further size reduction is required to fit the text into the selected
label length, the total text size will be modified after reducing the text width to
"x 1/2" setting.)
3
Press the OK or Enter key to apply the setting.
• Press the Esc key to return to the previous step.
• Press the Space key to set the style to the default setting ("Text Size").
1
Press the Frame key. The current settings are displayed.
Select the frame using the
You can also select the frame directly by typing the
frame number using the number keys.
2
Press the OK or Enter key to apply the settings.
New settings are NOT applied if you do not press
the OK or Enter key.
• Press the Esc key to return to the previous step.
• Press the Space key to set the selected attribute to the default value.
• Refer to the Frames table for a list of available frames.
or key.

Setting Frame

or key.
or key, and then press the
Setting Frame
1
2
3
4
5
6
7
8
13