Entering Bar Code Data - Brother P-touch PT-2030 User Manual

EDITING A LABEL
Attribute
Protocol
Width
Under#
(characters printed
below bar code)
C.Digit
(check digit)

Entering Bar Code Data

1
Press the Bar Code key.
The Bar Code Input screen is displayed.
Up to five bar codes can be entered on a label.
2
Type in the bar code data.
Special characters can be entered in the bar code
when using the CODE39, CODABAR, CODE128 or
GS1-128 (UCC/EAN-128) protocols. When not using
special characters, go to step 5.
3
Press the Symbol key.
A list of characters available for the current protocol is displayed.
4
Select a character using the
the OK or Enter key to insert the character in the bar
code data.
5
Press the OK or Enter key to insert the bar code in the
label.
The bar code is displayed on the text entry screen.
38
Creating a Bar Code Label
Bar Code Settings
CODE39, CODE128, EAN-8, EAN-13,
GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF),
(only available for the CODE39, I-2/5
and CODABAR protocols)
or key, then press
Value
CODABAR
Small
Large
On
Off
Off
On