Canon PIXMA iP6000D Quick Start Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. PIXMA iP6000D
  6. Quick start manual
Canon PIXMA iP6000D Quick Start Manual

Canon PIXMA iP6000D Quick Start Manual

Photo printer
Hide thumbs Also See for PIXMA iP6000D:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
Photo Printer
Photo Printer
Photo Printer
Photo Printer
Quick Start Guide
Quick Start Guide
Quick Start Guide
Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for Canon PIXMA iP6000D

Summary of Contents for Canon PIXMA iP6000D

  • Page 1 Photo Printer Photo Printer Photo Printer Photo Printer Quick Start Guide Quick Start Guide Quick Start Guide Quick Start Guide...
  • Page 2 Copyright Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc.

  • Page 3: Table Of Contents

    Canon U.S.A., Inc.Limited Warranty --- (USA Only) ........

  • Page 4: Basic Printing

    Turning on the Printer Press the POWER button. POWER lamp flashes while the printer warms up and changes to a steady (non- flashing) green when the printer is ready. Before unplugging the power cord, turn off the printer and Important ensure that the green lamp has gone out.

  • Page 5: Loading Paper

    Print Media to Avoid Do not use the following types of paper. Using such paper will not only produce unsatisfactory results, but can also cause the printer to jam or malfunction. • Folded, curled or wrinkled paper • Damp paper •...

  • Page 6: Using The Sheet Feeder And The Cassette

    You can use just the sheet feeder or cassette according to the location of the printer. For example, if you intend to install the printer in a small place, such as on a shelf with minimal space, you can use just the cassette for printing.

  • Page 7: Loading Paper In The Sheet Feeder

    Loading Paper in the Sheet Feeder For detailed information on the specialty media Canon provides for Notes use with its various printers, refer to “Canon Speciality Media page 13. See “Printing Media” in the User’s Guide for detailed instructions on how to load envelopes and specialty media into the printer.
  • Page 8 You can use general copy paper or Canon’s Super White Paper SW-201. Notes You can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm or 0.52 inches in height) in the sheet feeder. However, do not stack more than 50 sheets in the paper output tray.

  • Page 9: Loading Paper In The Cassette

    Caution You cannot load sticker paper in the cassette. Load one sheet at a time in the sheet feeder. For detailed information on the specialty media Canon provides for Notes use with its various printers, refer to “Using Speciality Media page 12.
  • Page 10 Basic Printing Prepare to load paper. (1) Pull out the cassette from the printer. (2) Remove the cover on the cassette. (3) Pinch the tab and extend the cassette if needed. Notes •When loading A5- or larger sized paper (nonstandard-...
  • Page 11 Load the paper. You can use general copy paper or Canon’s Super White Paper SW-201. Notes You can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm or 0.52 inches in height) in the cassette. However, do not stack more than 50 sheets in the paper output tray.
  • Page 12 Basic Printing Prepare the paper output tray. You can also select the paper source with the printer driver. For details, Note refer to “Changing the Paper Source” in the User’s Guide . (1) 1 Open the paper output tray. 2 Pull out the paper output tray extension completely.
  • Page 13 4" x 6" or 5 5 5 5 " " " " x 7 x 7" " " " from Paper Size 4" x 6" 4" x 6" For a detailed description of the printer driver settings, refer to “Printing with Windows Windows” on page 14, or “Printing with Macintosh Windows...

  • Page 14: Using Speciality Media

    Basic Printing Using Speciality Media Canon recommends that you use genuine Canon media to ensure optimal print quality. Photo Quality Media • Photo Paper Pro • Photo Paper Plus Glossy • Photo Paper Plus Semi-gloss • Photo Paper Plus Double Sided •...
  • Page 15 *2 Loadable only in the sheet feeder. Do not load in the cassette. *3 You can print photos in a memory card or digital camera on the Canon-branded sticker without a computer. For details, refer to the Direct Printing Guide .

  • Page 16: Printing With Windows

    The steps described in this section are for printing in Windows XP. Turn on the printer. See “Turning on the Printer Turning on the Printer” on page 2. Turning on the Printer Turning on the Printer Load the paper in the printer.
  • Page 17 (1) Select Print Print Print Print from the application software's File Specify the required settings. Basic Printing File menu. File File (2) Ensure that Canon PIXMA Canon PIXMA Canon PIXMA Canon PIXMA iP6000D iP6000D is selected. iP6000D iP6000D Click Preferences...
  • Page 18 Main tab. You can control the print quality in the Set Print Quality Main Main dialog box. For details about other printer driver functions, refer to “Printer Driver Functions (Windows)” in the User’s Guide or Help Select Preview before printing displays a preview screen that allows you to confirm the selected printing effects and how your document will look when printed.

  • Page 19: Printing With Macintosh

    The steps described in this section are for printing in Mac OS X v.10.3. Turn on the printer. See “Turning on the Printer Turning on the Printer” on page 2. Turning on the Printer Turning on the Printer Load the paper in the printer.
  • Page 20 Basic Printing Select Paper Size. (1) Select the Page Setup Page Setup from the application software's File Page Setup Page Setup The Page Setup Page Setup Page Setup Page Setup dialog box opens. Specify the required settings. (1) Select Print Print Print from the application software's File Print...
  • Page 21 See “Adjusting Print Quality Adjusting Print Quality” on page 23. Adjusting Print Quality Adjusting Print Quality For details about other printer driver functions, refer to “Printer Notes Driver Functions (Macintosh)” in the User’s Guide or Help Clicking the Preview Preview button displays a preview screen that allows...

  • Page 22: Canceling Printing

    Printing is canceled and paper is fed out. Canceling Printing Canceling Printing” on page 20. Canceling Printing iP6000D in the Printer iP6000D iP6000D Printer Printer list displays a dialog that Stop Printing. Stop Printing Stop Printing RESUME button on the printer. RESUME RESUME Press the RESUME Printer Delete.

  • Page 23: Advanced Printing

    In your application, select the command to print a document. The Print Print Print dialog box can usually be opened by selecting Print Print Ensure that the Canon PIXMA iP6000D is selected. Then click Preferences (or Properties). The Printer Properties Printer Properties dialog box opens. Printer Properties...
  • Page 24 Preferences or applications. For details about these tabs, refer to the Windows Preferences Preferences documentation. Details Details Details tab) are displayed. These tabs are not Printer Properties dialog box is opened from Printing Printer Properties Printer Properties Properties, the default Window Properties Properties Printing...

  • Page 25: Adjusting Print Quality For Photographs

    Using recommended Canon paper, speciality media, and inks for printing photographs can significantly improve the quality of your printouts. See the inside back cover for a list of Canon Specialty Papers and ink tanks for this printer. Printer Driver Settings...
  • Page 26 To manually adjust Print Quality settings: Open the Printer Properties dialog box. See “Opening the Printer Properties Dialog Box from Your Application Opening the Printer Properties Dialog Box from Your Application Opening the Printer Properties Dialog Box from Your Application Opening the Printer Properties Dialog Box from Your Application Program”...
  • Page 27 Open the Print dialog box. See “Printing with Macintosh Printing with Macintosh” on page 17. Printing with Macintosh Printing with Macintosh Select Quality & Media from the pop-up menu, and then click Detailed Setting. Move the slide bar to adjust the print quality. When the process is complete, click Print.
  • Page 28 Background Printing function is not available. Open the Printer Properties dialog box. See“Opening the Printer Properties Dialog Box from Your Application Opening the Printer Properties Dialog Box from Your Application Opening the Printer Properties Dialog Box from Your Application Opening the Printer Properties Dialog Box from Your Application Program Program”...
  • Page 29 To use Vivid Photo option: To use Vivid Photo option: To use Vivid Photo option: To use Vivid Photo option: Vivid Photo intensifies background colors such as fields, trees, oceans and skies, Vivid Photo Vivid Photo Vivid Photo while maintaining natural skin tones in the images. In Windows Me or Windows 98 Note If Background Printing...
  • Page 30 Advanced Printing To reduce noise from images captured with a digital camera: To reduce noise from images captured with a digital camera: To reduce noise from images captured with a digital camera: To reduce noise from images captured with a digital camera: Photo Noise Reduction Photo Noise Reduction Photo Noise Reduction...

  • Page 31: Saving And Recalling Driver Settings

    Saving and Recalling Driver Settings When you change printer driver settings for a specific print job, such as printing black and white photos, or printing documents with a special background, you can save and name these settings for future use on similar print jobs.
  • Page 32 Advanced Printing Click OK on the Profiles tab. This registers your printer driver print settings. You can retrieve or delete the print settings profile at any time. Note Retrieving profile: Retrieving profile: Retrieving profile: Retrieving profile: Select the desired profile from Printing Profiles, from Profiles Profiles.
  • Page 33 Click OK. This registers your printer driver settings. You can retrieve or change the saved driver settings at any time. Note Retrieving the registered driver settings: Retrieving the registered driver settings: Retrieving the registered driver settings: Retrieving the registered driver settings:...

  • Page 34: Using The Bundle Software

    Canon BJ Printers support Exif Print and use a suitable photo application to read the camera data precisely, producing optimal prints. This enables you to create prints that reproduce color more...

  • Page 35: Printing Borderless Photographs

    Selecting the wrong media type may affect the colors or cause printing to slow down. To ensure optimum printing results, select the correct media type that matches the paper you are loading in the printer. Borderless Printing may not assure high print quality on the edges of the Borderless Printing...
  • Page 36 When the cassette lamp is lit, paper is fed from the cassette. All Programs All Programs (or Programs All Programs Programs Programs Programs), Canon Utilities Easy-PhotoPrint. Easy-PhotoPrint Easy-PhotoPrint Applications folder, the Easy-PhotoPrint Applications Applications Easy-PhotoPrint Easy-PhotoPrint icon.
  • Page 37 (2) Click the [ [ [ [ ] ] ] ] [ [ [ [ ] ] ] ] buttons on the thumbnail of the photograph you want to print to specify the number of copies. Clicking Correct/Enhance Note example, using this feature, you can correct the red-eye caused by the camera’s flash or smooth and beautify the facial skin.
  • Page 38 Advanced Printing Select the layout and print the photograph. (1) Click the Layout/Print Layout/Print Layout/Print Layout/Print tab. (2) Select Borderless (full) Borderless (full). Borderless (full) Borderless (full) Click Print Print. Print Print click Print Print. When the Print Print confirmation message is displayed, click OK OK.

  • Page 39: Printing Maintenance

    Replacing an Ink Tank When replacing an ink tank, check the model number very carefully. The printer will not print properly if the wrong ink tank is used, or installed in the incorrect position. With this printer, ink tanks must be installed from the right in the order indicated below.
  • Page 40 Printing Maintenance The following message appears when ink is empty. Printing will resume as soon as ink tank is replaced and the inner cover and the cover are closed. Empty ink tank Note When Low Ink is Detected Tank with low ink level The ink tank with [X] symbol is out of ink.
  • Page 41 Delete Job Delete Job, the printer cancels the Delete Job current printing job. Stop Job Stop Job Stop Job, the printer stops the current Stop Job printing job. Stop All Jobs Stop All Jobs, the printer stops all Stop All Jobs Stop All Jobs printing jobs.

  • Page 42: Replacing Ink Tanks

    Replacing Ink Tanks When an ink tank runs out of ink, replace it using the following steps. Ensure that the printer is on, and then open the paper output tray. Open the cover, and pull down the inner cover forward to open.
  • Page 43 Prepare a replacement tank. (1) Unpack the new ink tank and pull off the orange tape. (2) Remove the orange protective cap from the bottom of the ink tank and discard it. Be sure to remove the clear film from the ink tank in the exact order Important shown in step 4-(1), as failure to follow this step may cause the ink to leak and stain your clothes and hands.
  • Page 44 To maintain optimal print quality, use an ink tank within six months of its first use. Once an ink tank has been used, do not remove it from the printer and leave it out in the open. This will cause the ink tank to dry out and the printer may not operate properly if it is reinstalled.

  • Page 45: When Printing Becomes Faint Or Colors Are Incorrect

    Aligning the Print Head Aligning the Print Head” on page 57 Aligning the Print Head mark on the ink tank and ensure that the ink tank is Print Quality setting in the printer driver settings. Print Quality Print Quality If white stripes appear...

  • Page 46: Printing The Nozzle Check Pattern

    2. Press the paper feed switch to select the paper source in which 3. Hold the RESUME With the printer on, load a sheet of Letter-sized plain paper in the sheet feeder or cassette. Press the paper feed switch to select the paper source in which you loaded the paper.
  • Page 47 (3) Read the message and click Print Check Pattern The nozzle check pattern will be printed. Clicking Initial Check Items Initial Check Items displays the items to be checked before Initial Check Items Initial Check Items Note printing. (4) When the confirmation message is displayed, click OK (5) Ensure that the pattern is printed properly.
  • Page 48 Printing Maintenance With the printer on, load a sheet of Letter-sized plain paper in the sheet feeder or cassette. Press the paper feed switch to select the paper source in which you loaded the paper. Open the BJ Printer Utility dialog box.

  • Page 49: Examining The Nozzle Check Pattern

    Examining the Nozzle Check Pattern The nozzle check pattern should appear as follows when ink is discharged properly. Examine the nozzle check pattern output by the printer. Note The nozzle check pattern will not be printed correctly if there is not enough ink.
  • Page 50 Printing Maintenance Click Cleaning Cleaning in the Pattern Check Cleaning Cleaning Pattern Check dialog box to start the print head cleaning. Pattern Check Pattern Check See “Print Head Cleaning Print Head Cleaning” on page 49. Print Head Cleaning Print Head Cleaning If the patterns have no white stripes, click Exit Exit Exit...

  • Page 51: Print Head Cleaning

    Ensure that the inner cover is closed. Notes The print head can also be cleaned from the printer itself. With the printer on, hold down the RESUME The print head cleaning dialog box of step 3-(3) is directly displayed when you...
  • Page 52 Printing Maintenance (3) When the confirmation message is displayed, click OK Print head cleaning starts when the POWER Do not perform any other operations until the print head cleaning Important finishes. This takes about 30 to 40 seconds. (4) Read the message and click Print Check Pattern pattern.
  • Page 53 Examining the Nozzle Check Pattern Examining the Nozzle Check Pattern Ensure that the printer is turned on. Open the BJ Printer Utility dialog box. (1) Double-click the hard disk icon where the printer driver was installed, the Applications folder, and the Utilities Applications Applications...
  • Page 54 Printing Maintenance (3) When the confirmation message is displayed, click OK Print head cleaning starts when the POWER Do not perform any other operations until the print head cleaning Important finishes. This takes about 30 to 40 seconds. (4) Read the message and click Print Check Pattern pattern.

  • Page 55: Print Head Deep Cleaning

    Ensure that the printer is turned on. Open the Printer Properties dialog box. See “Opening the Printer Properties Dialog Box Directly from the Start Menu Opening the Printer Properties Dialog Box Directly from the Start Menu” on Opening the Printer Properties Dialog Box Directly from the Start Menu Opening the Printer Properties Dialog Box Directly from the Start Menu page 21.
  • Page 56 Notes ensure that there are sufficient ink levels in all ink tanks and turn off the printer. Be sure to perform another print head deep cleaning 24 hours after turning off the printer. If this does not solve the problem, the print head may be worn out.
  • Page 57 Ensure that the printer is turned on. Open the BJ Printer Utility dialog box. (1) Double-click the hard disk icon where the printer driver was installed, the Applications folder, and the Utilities Applications Applications Applications (2) Double-click the Printer Setup Utility When using Mac OS X v.10.2.x, double-click the Print Center...
  • Page 58 Notes ensure that there are sufficient ink levels in all ink tanks and turn off the printer. Be sure to perform another print head deep cleaning 24 hours after turning off the printer. If this does not solve the problem, the print head may be worn out.

  • Page 59: Aligning The Print Head

    Aligning the Print Head This operation must be carried out when using the printer for the first time. Aligning the print head allows you to print without shifts in the color registration. Print head alignment is performed either automatically or manually. This section deals with automatic print head alignment only.
  • Page 60 If a message warning you not to perform other operations is displayed, click Check the printed pattern. If the pattern is printed as shown below, the print head is aligned automatically. The printer is now ready to use. If the pattern is not printed successfully, open the cover and ensure Notes that the ink tanks are correctly installed.
  • Page 61 With the printer on, load a sheet of Letter-sized plain paper in the sheet feeder. Open the BJ Printer Utility dialog box. (1) Double-click the hard disk icon where the printer driver was installed, the Applications folder, and the Utilities...
  • Page 62 Printing Maintenance Check the printed pattern. If the pattern is printed as shown below, the print head is aligned automatically. The printer is now ready to use. If the pattern is not printed successfully, open the cover and ensure Notes that the ink tanks are correctly installed.

  • Page 63: Troubleshooting

    LCD or photos cannot be printed properly from a digital camera, refer to the Direct Printing Guide . • “Cannot Install the Printer Driver Cannot Install the Printer Driver” on page 62 Cannot Install the Printer Driver Cannot Install the Printer Driver •...

  • Page 64: Cannot Install The Printer Driver

    Close all open software applications before reinstalling the printer driver. Refer to the Easy Setup Instructions for installing the printer driver. If the printer driver installation did not start automatically when you inserted the Setup Software & User’s Guide CD-ROM into the CD-ROM drive: 1.

  • Page 65: Print Quality Is Poor Or Contains Errors

    Follow the instructions packaged with your specialty media for loading and handling. On the Main Main Main tab of the printer driver, confirm that the Media Type Main matches the paper loaded. In the Print Print dialog box of the printer driver, select Quality & Media...
  • Page 66 Inside of the printer Smudged is dirty Try This Use High Resolution Paper, Photo Paper Pro or other Canon specialty paper to print images that have high color saturation. Reduce the Intensity Intensity setting in the printer driver and try printing again.

  • Page 67: Troubleshooting Printer Hardware

    Read-only Mode. Read-only Mode 4. Click OK Stop printing and turn the printer off for at least 15 minutes to allow the print head to cool down. The print head tends to overheat when printing continuously for long periods of time.
  • Page 68 Print Print Print load paper in the paper source selected with paper feed switch on the printer. If you select other settings, ensure that paper is loaded in the correct paper source. For a detailed description of the printer driver settings, refer to “Changing the Paper Source”...
  • Page 69 Page Setup Printer Properties Printer Properties driver (Windows) or the Page Setup Page Setup dialog box of the printer driver (Macintosh) Page Setup Page Setup to ensure that it matches the size of the paper loaded. Your operating system may be out of free disk space.

  • Page 70: Paper Does Not Feed Properly

    If a foreign object, such as a paper clip or a pencil, has fallen into the printer, turn off the printer and unplug the power cord from the power outlet before you try to remove it.

  • Page 71: Paper Jams

    • If the paper is jammed in the sheet feeder, slowly pull the paper out from the sheet feeder. • If you cannot pull the paper out, turn the printer off, and then turn it back on. The paper will be ejected automatically.
  • Page 72 2. When you can see the jammed paper, slowly pull the paper out. Be careful not to touch the components inside the printer. If you cannot extract the paper, turn the printer off, and then turn it back on. The remaining paper will be ejected automatically.
  • Page 73 Feed Properly paper and are loading it into the printer correctly. If you cannot remove the paper or if the paper tears inside the printer, or if the paper jam error continues after removing the paper, contact the Customer Care Center.

  • Page 74: Handling Error Messages

    RESUME button to resume printing with an empty ink tank. Replace it RESUME RESUME with a new ink tank immediately after the printing. It may damage the printer if you continue printing with an empty ink tank. See “Replacing an Ink Tank Replacing an Ink Tank”...
  • Page 75 An error that requires contacting the Customer Care Center may have occurred. Disconnect the printer cable from the printer, and then turn the printer off and unplug the printer from the power supply. Plug the printer back in and turn the printer back on after leaving it after a while.

  • Page 76: An Error Message Appears On The Screen

    Port Details Details A USB port is selected if either USBnnn (Canon PIXMA iP6000D) or USBPRNnn (Canon PIXMA iP6000D) is indicated. If the port setting is not correct, change the port setting according to the interface you are using on the Port...
  • Page 77 Printer following the procedures described in the Easy Setup Instructions . The printer has a built-in waste ink absorber to hold the ink used during print head cleaning. Eight flashes indicates that this absorber is nearly full. Press the RESUME RESUME RESUME button to clear the error so you can continue printing.
  • Page 78 ** The waste ink absorber absorbs ink used during cleaning, for example. When you experience this error, you will need to call for servicing to replace the waste ink absorber and to check the printer for proper operation. Try This...

  • Page 79: Appendix

    Appendix Installing the Printer Driver when using Mac OS 9.x When using Mac OS 9.x, install the printer driver following the procedure below. Turn on your Mac and insert the Setup Software & User’s Guide CD-ROM . Open the Mac OS 9.x folder on the CD-ROM, then double–click the Printer Driver folder.
  • Page 80 Appendix Select the Apple menu, then Chooser. Click the PIXMA iP6000D icon in the Chooser. Close the Chooser. Register your product at www.registercanon.com to ensure product Note support. To ensure highest quality output, carry out print head alignment. Refer to the Printer Driver Guide for Mac OS 9 located on the Setup Note Software &...

  • Page 81: User's Guide Table Of Contents

    User’s Guide Table of Contents Your printer's electronic User's Guide , located on the Setup Software and User's Guide CD- ROM , offers detailed information on the following topics. How to Use This Manual How to Read This Manual Safety Precautions...

  • Page 82: Specifications

    (for Borderless Printing: 215.9 mm / 8.5 in) (for Borderless Printing: 215.9 mm / 8.5 in) (for Borderless Printing: 215.9 mm / 8.5 in) (for Borderless Printing: 215.9 mm / 8.5 in) Canon extended mode Canon extended mode Canon extended mode Canon extended mode...
  • Page 83 Supported recording media: Supported recording media: Supported recording media: Supported recording formats: Supported recording formats: Supported recording formats: Supported recording formats: Camera Direct Print Canon “Bubble Jet Direct” Compatible Paper Compatible Paper Compatible Paper Compatible Paper Layout Print Layout Print Layout Print...
  • Page 84 *1 When settings cannot be made on the camera, or when “Standard Setting” is selected, the printer's settings will be applied to print. *2 If using a Canon PictBridge-compatible camera, you can select it. Use a Macintosh series computer equipped with USB Use a Macintosh series computer equipped with USB...
  • Page 85 Additional Systems Requirements for Electric Manual Pentium Pentium® 75 MHz equivalent or higher processor (Pentium 75 MHz equivalent or higher processor (Pentium® 133MHz equivalent or higher processor recommended) Pentium Pentium 75 MHz equivalent or higher processor (Pentium 75 MHz equivalent or higher processor (Pentium 15 MB of available hard disk space (when installing electronic manuals) 15 MB of available hard disk space (when installing electronic manuals) 15 MB of available hard disk space (when installing electronic manuals)

  • Page 86: Safety Precautions

    Power supply Power supply Never attempt to plug in or unplug the printer from the power supply when your hands are wet. Never attempt to plug in or unplug the printer from the power supply when your hands are wet.
  • Page 87 Do not use an extension lead/ cord. Never use a power supply source other than the one rated for the printer in the country where you Never use a power supply source other than the one rated for the printer in the country where you...

  • Page 88: Regulatory Information

    Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza...

  • Page 89: Canon U.s.a., Inc.limited Warranty

    Canon U.S.A., Inc.Limited Warranty --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to the new or refurbished Canon-brand product (“Product”) packaged with this limited warranty, when purchased and used in the United States only.
  • Page 90 InstantExchange program, a replacement product will be provided to you prior to your return of the defective product. Since the defective product becomes the property of Canon USA at the time of the exchange, the defective product must be returned in the shipping materials provided.

  • Page 91: Index

    Camera Direct Print (Canon “Bubble Jet Direct”) ...81 Canceling Print Jobs ...16, 20 Canceling Printing ...20 Cannot Install the Printer Driver ...62 CANON U.S.A., Inc. LIMITED WARRANTY --- (USA Only) ..87 Card Slot is Write-Enabled ...65 Cleaning ...49, 51 Deep Cleaning ...53, 55 Driver saving setting ...29...
  • Page 92 Print Quality ...16, 23, 63 Print Quality is Poor or Contains Errors ... 63 Printer Driver Setting for Media Type ... 13 Printer Properties dialog box ... 15, 21, 44, 64 Printing the Nozzle Check Pattern ... 44 Read-only Mode ... 65 Recalling Driver Settings ...

Table of Contents