Installation; Lens; When Using Auto Iris Lens; When Using A C/Cs-Mount Lens - Samsung SCB-3001 User Manual

Installation

Lens

The lens is not supplied with this camera. Purchase a lens suitable for your
environment. This camera accepts the auto iris lens and both C-and CS-mount
lens.
Notes
• T o use the functions of this camera effectively it is recommended that a DC type Auto Iris
lens is used.
• K eep the lens surface clean, if it becomes contaminated with dirt or fingerprints the
picture quality suffers.

When Using Auto Iris Lens

1. Strip the insulation of the auto iris lens
cable 8mm from the end.
approx. 8mm
3. Remove the cover of the auto iris lens connector plug and solder the lens cable to
the connector pin of the plug.
LENS
Pin No. DC VIDEO
No.1 Pin Damping - Red (power)
No.2 Pin Damping + NC
No.3 Pin Drive + White (video signal)
No.4 Pin Drive - Black (GND)
14
COLOR CCD CAMERA
2. Strip the insulation of the core of the
auto iris lens cable to expose a 2mm
length.
approx. 2mm
Lens cable
No. 3 Pin
connector
No. 1 Pin
No. 4 Pin
No. 2 Pin
User Guide
4. Fit the cover of the auto iris lens connector
plug, remove the protective glass cover
from the front of the camera, and fasten
the auto iris lens by turning it clockwise.
5. Set focus of camera using Back Focus Control
Lever of camera side after combining Auto
Iris lens.
Back Focus Control Lever

When Using a C/CS-Mount lens

Before installing a lens, identify whether the lens to be installed is a C-Mount or
CS-Mount. This camera is set for a CS-Mount Lens by default. To install a C-Mount Lens, a
simple modification is required.
•
When Using a CS Mount Lens
Remove the protective glass cover at the front of this product and turn the CS-Mount
Lens clockwise to install it. And set focus of camera using Back Focus Control Lever of
camera side after combining CS-Mount lens.
COLOR CCD CAMERA
C-mount adapter
15
User Guide