Samsung SCB-3001 User Manual page 19

Operating Your Camera
SYNC : In areas where the supply is at 60Hz(NTSC),
50Hz(PAL) frequency, you can synchronize the
output phase of multiple cameras using the
power synchronization function (Line-Lock)
without using a synchronization signal generator.
INT : Internal Synchronization Type
·
L/L : Power Synchronization Type, Line-lock
·
Press the Function Setup button.

You can select a desired phase from 0 to 359 when select 'phase'.

EXTERN : The camera can use the external power source frequency for the synchronization.
·
Regardless of the input voltage the EXTERN MODE is available only when an
external trigger signal input into camera.
Notes
• W hen using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L type
synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
• W hen using an external input, the signal level must be +3 V (60 Hz ± 0.2).
Otherwise, the camera may malfunction and/or become damaged.
INTELLIGENCE : Commands the camera to motion-detect and trace an object.
INTELLIGENCE
1. MOTION
2. DETECT BOX
3. ALARM OUT
4. DETECT AREA
5. MASK AREA
6. SENSITIVITY
7. DETECT SIZE
8. RETURN
COLOR CCD CAMERA
OFF
ON
OFF
3
3
36
User Guide
●MOTION : Select motion types to detect.
OFF : Not being used.
·
DETECTION : Since the camera detects motion without any additional external
·
sensor, you can monitor activity more efficient.
TRACKING : Commands the camera to detect and
·
trace a moving object.
▶FENCE : You can select up to 4 FENCE.
▶MODE : Determines whether to use the fence
selected in the FENCE.
▶TYPE : Two types, line and area, of fences are
available.
▶COUNT : Displays the number of times that an
object enters or leaves a fenced area.
▶FILL : Fill or remove color from the FENCE.
▶POSITION : Defines the position and detection direction of a line or fenced area.
1) LINE FENCE
-SEL POS : Selects a position from POS1,POS2.
- X POS / Y POS : Adjust the size and position of the selected line fence.
- DIRECTION
DIR1 : Detects objects moving left to right on the fence line.
·
DIR2 : Detects objects moving right to left on the fence line.
·
DIR1/2 : Detects all objects moving crosswise on the fence line.
·
-...RETURN : Select this to save the POSITION menu settings and return to the
TRACKING menu.
2) AREA FENCE
- SEL POS : Selects a position from POS1 ~ POS4.
- X POS / Y POS : Adjust the size and position of the selected area fence.
- DIRECTION
IN : Detects objects entering the fenced area.
·
OUT : Detects objects exiting the fenced area
·
IN/OUT : Detects all objects entering and exiting the fenced area.
·
- RETURN : Select this to save the POSITION menu settings and return to the
TRACKING menu.
RETURN : Select this to save the TRACKING menu settings and return to the
▶
INTELLIGENCE menu.
COLOR CCD CAMERA
37
User Guide